Polishing Tenax filler in Travetine floor

[cottage1]

Dear Forum
I need a product and process for polishing small areas of Tenax filler in a Traventine floor.
The areas of filler has been colourmatched and buffed using 800 - 1200 grade paper but now needs
polishing to match surrounding tile. I have tried applying Lithofin care - sheen but this will
not produce a gloss finish. Any suggestions please.

 

[Time's Ran Out]

Johnsons traffic wax!

 

[Stef]

I've used jolly glue, when I used it I masked off the area surrounding where the filler was going.
I didn't need to buff it up as it was fine.
Not sure what will work but will be good to know.

 

[Just Rizzle]

lithothin stone polish could do the trick

 

[Lithofin BOB]

Which room is this floor in.?
do you have an impregnator in first? Care sheen will sink in if not. Also this product will build with time/
if not a bathroom , I use our cobble wax, over impreg.
do you want to bring shine to rest of tile?

 

[cottage2]

Thanks for helpful reply. Location is Hallway and no I did'nt use an impregnator but sounds as if a wax would be best

 

[cottage2]

Just for clarification, please. Lithofin supply two products; Cobble wax and Polish Cream. Both seem suitable for reinstating a polished surface. Does anyone have experience of which product is best, please. Thanks

 

[Lithofin BOB]

cream polish is for vanity/worktops, cobble wax is for fine honed/honed floors, this would be best, test for suitability and you like finish. ideally you will have a suitable impregnator in first , we have MN stain stop