Recommended approach for tiling around stairs.

[johnboy]

My staircase is all finished in oak and was just wondering for finishing around the bottom step and other bits would you typically undercut the step which is a big solid lump of oak or cut the tile to match in and grout to the stairs.

Thanks in advance

 

[Dave]

My staircase is all finished in oak and was just wondering for finishing around the bottom step and other bits would you typically undercut the step which is a big solid lump of oak or cut the tile to match in and grout to the stairs.

Thanks in advance

Scribe and Silicon 👍

 

[johnboy]

I was hoping you'd say that!! 😁

 

[Jon_Hall]

I agree with Dave, do your best not to get any tile adhesive on the oak as it can stain. Also worth checking the Silicon on an off cut to check that doesn't stain the oak as well.

 

[johnboy]

I agree with Dave, do your best not to get any tile adhesive on the oak as it can stain. Also worth checking the Silicon on an off cut to check that doesn't stain the oak as well.

Thanks Jon, when laying them im going to mask up the base of the oak and then trim it off after adhesive is set. Not sure what you mean by on and off cut...

 

[Dave]

Thanks Jon, when laying them im going to mask up the base of the oak and then trim it off after adhesive is set. Not sure what you mean by on and off cut...

Jon means on off cut of the oak incase it bleeds into the oak and stains, use an acetate free Silicon and it should be fine. I haven’t had one stain yet.

 

[johnboy]

Apolgies Jon I read that as 'and' for some reason, been a long week i suppose yeah I will try that as i have a small piece left over.