Retiling wetroom advice on how best to proceed

Tilers Forums Official Sponsors

Hi all,

Just a quick question. Do I need to prime the surface of the ply I will be using to overboard my floor, before I stick the wedi board on?

I will be using Kerakoll No Limits, they advise I need to prime the ply?
 
Thank you for your reply..

Wall tiles have arrived. This is going to be a nightmare.... :fearful:

6FC9BE6C-0F59-48DC-983A-78A890BABC92.jpeg
 
Crap it says on box lol..

What’s your opinion on these tiles??

They're nice tiles to cut and install but my personal opinion is that there are only 2 or 3 tilers in Preston capable (and equipped) to install them.
I am one. The other 2 you would get hold of via Roccia!
I don't know of anyone ESP are using. I was recommeded to them by Grespania but we've both been too busy to meet so far.
Anyone else... Risky.

They shouldn't have been dropped on the uneven ground either.
Don't leave them like that for too long, as the pallet starts to sag, the tiles will stress.
 
That’s exactly what my local showroom said to me, they put some in their showroom but found no installer wanted to touch it. Those who did couldn’t install it properly.

It’s a separate trade to an extent. Very niche.

For me personally I haven’t and wouldn’t install anything near that size. Not equipped physically or have the talent to do it.
 
I’m wondering if we will see a frame made up of chinese suction cups, CLS and Gaffer tape.

......seriously though, I’d imagine the correct installation equipment is absolutely essential.
 

Featured Threads

Advertisement

Thread statistics

Created
YT233,
Last reply from
Lou,
Replies
91
Views
25,903

Weekly Email Digest

Back
Top

Click Here to Register for Free / Remove Ad