Set out

[Spare Tool]

If you can get hold of a couple of bags of Tilemaster rapid slc first thing you could be fixing tiles by lunchtime tomorrow

 

[WetSaw]

Living over here I'm not sure of what is available in the UK, good shout Andy.

 

[Cabnero]

Ok that sounds good. As I said though I have no experience with slc. How do I establish my levels across the floor. I hear some people use screws?? Do I just pour from the high end and push it to the low end. Any (more) help would be appreciated. thanks

 

[Spare Tool]

Ok that sounds good. As I said though I have no experience with slc. How do I establish my levels across the floor. I hear some people use screws?? Do I just pour from the high end and push it to the low end. Any (more) help would be appreciated. thanks

To be honest 10mill across 2m isnt that far out and if the trays not level I'd be surprised if you'd even notice it, but if you really want it to be level then yes screws work as do spacers stuck together, anything that will give you a true level across and an idea of how deep to pour slc, make sure any escape routes for leveler are sealed then just poor and trowel till you cover your depth guides..

 

[Mark tiler 88]

To be honest 10mill across 2m isnt that far out and if the trays not level I'd be surprised if you'd even notice it, but if you really want it to be level then yes screws work as do spacers stuck together, anything that will give you a true level across and an idea of how deep to pour slc, make sure any escape routes for leveler are sealed then just poor and trowel till you cover your

 

[Mark tiler 88]

Same as well mate done this last week were ever I try to start ended up rubbish cut but this was the best I could of done