Tilers Forums Official Sponsors
O
Old Mod
What can I say........ You're a man after my own heart Paul! 😉
About £650 with three blades.
J
JayTiler
Thanks guys. Looks like the 10m is good saw do the have the dimensions of each of the three parts it breaks down to. Where abouts are you chalker
The sliding table is the largest bit. I keep it at my lockup a few miles away. Will try and get there today and measure up.
From memory the sliding table is about 30 in x 20 in
The motor table is about 2 ft x 14 in and about 15 in high
I have a pic of the stand below.
I live in North yorkshire. Closest town is Tadcaster, 3 miles away.
From memory the sliding table is about 30 in x 20 in
The motor table is about 2 ft x 14 in and about 15 in high
I have a pic of the stand below.
I live in North yorkshire. Closest town is Tadcaster, 3 miles away.
V
Versatile
How old is the machine .
Has it been hammered or used as a back up on stone ect
What blades are you putting with it
Thanks
Has it been hammered or used as a back up on stone ect
What blades are you putting with it
Thanks
