Stone profiling by Daz & Bri

[Ian]

Gosh, that's a really smooth edge, Bri, is that automatic straight off or did you have to smooth it after profiling?

That's been polished 3 times after profiling it, 200, then 400, then 800 grit polishing pads. I'm going to do another one tomorrow afternoon and take it to my local tile shop, hopefully they can display it and offer the profiling as a service on my behalf,

 

[Gazzer]

That's been polished 3 times after profiling it, 200, then 400, then 800 grit polishing pads. I'm going to do another one tomorrow afternoon and take it to my local tile shop, hopefully they can display it and offer the profiling as a service on my behalf,

If you do that then drill a few different size holes in the Travertine, that way you can show that you can do a drilling service too.

 

[Ian]

If you do that then drill a few different size holes in the Travertine, that way you can show that you can do a drilling service too.

That is a brilliant idea, I would never have thought of that! Consider it done

 

[Ian]

Here's the one for the shop, 2 edges profiled and a selection of holes cored in it. Much happier with this profile, I found that if I did alot of the polishing with the 200 and 400 grit pads the 800 was just used to give a final buff up.







I also ran the router around the corner on this one which gives a slightly different finish to the one I posted yesterday, not sure I like it as much but, it's another option.

Sent from iPhone using tapatalk

 

[Ian]

By the way, if anyone wants to try any of this kit out please just PM me or give me a ring and I'll be more than happy to let anyone have a go, tea or coffee will be provided but please bring your own stone to ruin :lol:

 

[Stewart]

You gonna offer a tiling service too at the tile shop.....(;0)


Created on iPhone.....

 

[Ian]

No mate I'm no good at that


Sent from iPhone using tapatalk

 

[DHTiling]

Nice profiling..


IMO 800 is to high a grit... verging on polished..rather than honed.

 

[Rich]

By the way, if anyone wants to try any of this kit out please just PM me or give me a ring and I'll be more than happy to let anyone have a go, tea or coffee will be provided but please bring your own stone to ruin :lol:

Well done Bri, thats good of you


... I think Im a little bit out of the way for that tho :smilewinkgrin:

 

[enduro]

So how much you going to charge for this service?

 

[Ian]

Nice profiling..


IMO 800 is to high a grit... verging on polished..rather than honed.

I agree Dave, I think 600 would probably be sufficient but stone tools didn't have a 600, I'm going to have a hunt round for one.

 

[Yorkshire Tiling Services]

nice one

 

[Ian]

So how much you going to charge for this service?

One edge of a 450x300mm took about half an hour to do so I suppose somewhere around the £10 mark per tile, maybe £15 if it was a 600mm. (Sorry if this counts as discussing pricing)

 

[Yorkshire Tiling Services]

Lovely stuff, stone looks much better when fixers take the time to bull nose & polish edges as required.
These are a couple of videos I made


bull nose and polish marble steps - YouTube

Marble floor and steps - YouTube

 

[Yorkshire Tiling Services]

would say ten mins per edge on a 600 tile, 20mm thick