tile adhesive on mapei tanking.

[provr6]

Can someone recommend a good tile adhesive compatible with the mapei tanking?

It needs to be applied about 6mm thick so the tiles overhang the shower tray (existing walls not that level).

Does it need to be mapei adhesive? if so which one would you recommend?

Many thanks

Mark

 

[Time's Ran Out]

I'd always use products from the same manufacturers and if you click on the Mapei advert as one of the forum sponsors, you can have a direct link to all their products.
Good luck.

 

[Qwerty]

A suitable adhesive would be either Mapei Keraflex, ProFlexible or Keraquick (the latter two are rapid set). All are flexible and suitable for use with Mapei tanking

 

[provr6]

Thanks for that.

Is Keraflex ok at 6mm thick (finished thickness after tile pressed in) or should i go for keraflex maxi?

 

[Qwerty]

Thanks for that.

Is Keraflex ok at 6mm thick (finished thickness after tile pressed in) or should i go for keraflex maxi?

Keraflex maxi will go to this thickness