Tiling onto Plywood

[rustylt2]

Have a job to do where the old kitchen wall tiles have been removed and some of the plaster has come away too. I was thinking the quickest wasy would be to screw 6mm plywood to the wall and tile onto that - nice even surface. What is the best primer to use before tiling? Tiles are just normal 100mm ceramic. Any other preperation required also?

 

[DHTiling]

Use backerboards not plywood ..much better to tile to...

 

[GazTech]

Available at guess where.....Gaz
HardieBacker™ 1/4'' Cement Board, with EZ Grid® Technology


HardieBacker™ 1/4'' Cement Board, with EZ Grid® Technology, for floors and countertops is America´s best selling 1/4'' board. It's the solution you can trust for your wet area floors, walls, ceilings, and countertops. This no-mesh board is the lightest cement board available and cuts easily, even in tight, awkward spaces. View Features & Benefits View Warranty View FAQs View Installation Instructions

 

[White Room]

Gaz, what sizes do topps sell Hardie 6mm, I've been getting 1.50 x .900 for about £16.00 a sheet Thanks

 

[GazTech]

1.2 x .8 m this was recently changed to this size for punters cars.... total coverage per sheet .96m2......£11.99 retail...£10 trade unless you know me !!...lol...Gaz

 

[Droopy]

:huh2:
Why not just use plasterboard, stuck with drywall addy?

 

[DHTiling]

No problem with plaster board either....what evers easiest .....

 

[Perry]

Drew it doesn`t cost enough :lol:

 

[GazTech]

:huh2:
Why not just use plasterboard, stuck with drywall addy?

Rapid is better Drew.....It is exactly what I did when on the tools......I dont sell plasterboard...it rots..but applied well, plasterboard is spot on....Gaz

 

[Droopy]

Drew it doesn`t cost enough :lol:

:14:
:lol:
----

Rapid is better Drew.....It is exactly what I did when on the tools......I dont sell plasterboard...it rots..but applied well, plasterboard is spot on....Gaz

Do you mean rapid set tile addy, instead of drywall addy?

 

[GazTech]

:14:
:lol:
----

Do you mean rapid set tile addy, instead of drywall addy?

Yep..the need for speed Drew...its money..an occupation...livelyhood...................not a hobby..............Gaz

 

[Perry]

yes gaz your right again

 

[Droopy]

Yep..the need for speed Drew...its money..an occupation...livelyhood...................not a hobby..............Gaz

How is it any quicker than drywall addy?

You'd have to prime the back of the plasterboard with acrylic for a kick off.

 

[Perry]

no you dont hes right drew and most tilers will have tile adhesive but not dry wall adhesive

 

[Droopy]

no you dont hes right drew and most tilers will have tile adhesive but not dry wall adhesive

Yes you do.
The rapid set is cement based, so the board has to be sealed with acrylic to reduce any chance of a reaction between that and the gypsum, just like you need to seal the front when you tile with cement based addy.

It is also at least 3 times the price, takes longer to go off, and is harder to use than dri-wall addy is.

I honestly can't see a single benefit from using that over dri-wall.