S
smallholder
I have a hot water underfloor heated anhydrite screed that is about to be tiled with 16mm thick travertine using a GBTA adhesive.
I was wondering how to tile the at the tri-fold door threshold. From the outside there is the sill, then a 125mm block then 25mm of cellotex and 10mm edge expansion insulation before getting to the screed. They are all at the same height.
Any suggestions would be appreciated.
I was wondering how to tile the at the tri-fold door threshold. From the outside there is the sill, then a 125mm block then 25mm of cellotex and 10mm edge expansion insulation before getting to the screed. They are all at the same height.
Any suggestions would be appreciated.