Topps Kamber tiles advice pls

[Luggsey]

I have a 153m2 job coming up and have a price from Topps for their Chinese porcelain Kamber tiles @£6.72 each.
So, any anybody floor laid any great amounts of these?
Are they good and square enough for 2mm gaps?
Do they cut OK, my current saw is a Husky flat table with genuine blade, I'm not sure it's going to be big enough for 600 porcelain?

Kamber™ 60x60 Tile | Topps Tiles - http://www.toppstiles.co.uk/tprod46947/kamber-60x60-tile.html

..................................

 

[Luggsey]

As a spark the real problem you are going to have is getting to grips with using a brush haha

I have seen them on site but they are made of wood and us sparks have soft hands that suffer splinters so I leave the brooms for Triggers.

 

[Luggsey]

I’ve did 70 square metres of them last year, easy enough cut with Sigma manual and grinder with decent diamond blade on. I gave them 3mm joints and had no problem with size. But as @macten said they are covered in greasy transit wax and need a really good clean. After grouting I sealed them as they did not feel as tho they were presealed. Not a bad tile to work with tho. Only advice I would give is spend your time on the prep for a straight forward install.

Cheers Callatiler, sounds like they would be a good choice for me.

 

[dynamictiling]

I have seen them on site but they are made of wood and us sparks have soft hands that suffer splinters so I leave the brooms for Triggers.

I was only kidding luggsey, better reply than my spark... 'you couldn't afford me to brush the floor'

 

[Luggsey]

Cheers Callatiler, sounds like they would be a good choice for me.

Thinking about prep I'm having a pumped screed on the ground floor and the company laying it told me there is in effect a crust left on top when it drys that has to be removed.
He said its easily removed with one of those stiff broom things at 48 hours after pouring.
Sealing with a suitable primer when done of course.
Anybody do it that way?

 

[GoneGuy]

Thinking about prep I'm having a pumped screed on the ground floor and the company laying it told me there is in effect a crust left on top when it drys that has to be removed.
He said its easily removed with one of those stiff broom things at 48 hours after pouring.
Sealing with a suitable primer when done of course.
Anybody do it that way?

Anhydrite screed?

 

[Luggsey]

Anhydrite screed?

He only gave it a trade name, flo......something, I said is that the calcium one and he said it was?

 

[GoneGuy]

@Ajax123 is the man to ask