Travertine adhesive?

[judge]

I would get the tile up and prime the bitumen underneath with rapid flexible and sbr mixed together to form a paste.I use a brush to cut in and the flat side of a large floor trowel to spread out the slurry mix.(paste)Also get hold of a fan or two to direct airflow onto primer to aid with the drying time :smilewinkgrin:

 

[PaulSmith]

Stuck down pretty solid and a nice course finish but will consult with customer.

If i do end up taking off the vinyls leaving the bitumen, what SBR is recommended with keraquick?

Thx

 

[PaulSmith]

Given the vinyl's are stuck solid, just wondering if the syntactic primer G would suit even though the substrate isn't porous.
I say primer G as I am using Mapei spf and it's what I have on the van.

 

[PaulSmith]

Mapei helpline suggested mapei prim grip as a primer. Non of the retailers had any so primed with SBR.

 

[PaulSmith]

Job finished this morning.