UFH and Ditra matting

[Brad]

I have worked for a tiling company that installed UFH, the Warmup type, over Ditra matting. However, there seem to be views that doing so is not a good idea....the theory is that the wire heats up and melts the Ditra??.........could anyone enlighten me on this?

 

[nybor62]

ufh doesent go on top of ditra,

ufh then slc then ditra

 

[Gazzer]

And no it wont melt it.

 

[Brad]

thanks for your reply.........another question.....if there is no risk of melting the Ditra, then what would be wrong with installing the UFH on top of the Ditra?

 

[Gazzer]

the ditra is a decoupler between substrate and tile.

 

[Brad]

forgive me, but I don't understand..........the felt-like layer on the underside of the matting is the decoupling membrane.........the top side, by virtue of its design, allows the tile to lock into the matting as the addy shapes to the recesses of the matting.....there surely isn't any decoupling action between the topside of the matting and the tile ??

 

[Stewart]

forgive me, but I don't understand..........the felt-like layer on the underside of the matting is the decoupling membrane.........the top side, by virtue of its design, allows the tile to lock into the matting as the addy shapes to the recesses of the matting.....there surely isn't any decoupling action between the topside of the matting and the tile ??

Your right, but if you introduce the heat mat on top of the Ditra, your creating an area of greater lateral stress rendering the Ditra less effective. If the heat mat is under the Ditra, then you allow the product to do it's job properly allowing the tile to heat up at a different rate to the substrate.

 

[Gazzer]

Page 12
http://www.schluter.com/media/DitraHandbook.pdf

 

[Brad]

thanks for that...makes sense

 

[Brad]

thanks for the link mate..........didn't come across it when on their website earlier.....good diagrams...worth bookmarking...top man!

 

[Gazzer]

thanks for the link mate..........didn't come across it when on their website earlier.....good diagrams...worth bookmarking...top man!

No problem !

 

[Dan]

Just bumping this thread. If it's not a current topic then don't worry about it for now. Other threads like this can be found in the main tiling forum. If you do want to reply to it, please do. Your information may add value to somebody reading the forum in the future.