Tilers Forums Official Sponsors
F
Flintstone
None!
What I do know is, I have been advised when fitting under floor heating for some one to lay karndean on that it needs to have 10mm of 2 part leveller.
What I do know is, I have been advised when fitting under floor heating for some one to lay karndean on that it needs to have 10mm of 2 part leveller.
J
J Sid
surely what even floor covering is going down the substrate needs to be solid and not likely to break up with time, be it tile Karndean or carpet. Or are we missing something?
S
Spacey
My point is that the entire job should be prepared and installed by a qualified Karndean installer from start to finish.
You can't possibly guarantee the finished floor if someone else has prepared the subfloor. I wouldn't.
In the event that there is any more issues you only have one person or company to deal with rather than two parties who would inevitably pass the buck to one and other. It's also peace of mind for the Client and the contractor
You can't possibly guarantee the finished floor if someone else has prepared the subfloor. I wouldn't.
In the event that there is any more issues you only have one person or company to deal with rather than two parties who would inevitably pass the buck to one and other. It's also peace of mind for the Client and the contractor
Don't mind me while I bump up some older but good threads. If you can contribute to the thread, go ahead. But if it's nothing for you then don't reply and it'll soon drop off the What's New page etc.
Worth linking to our new forum structure while I'm doing stuff:-
Worth linking to our new forum structure while I'm doing stuff:-
