Ufh On The Formed Tray

[Flintstone]

I've been doing a lot more wet rooms recently, a lot with ufh, what's people's thoughts on running the heat mat into the tray area too and round the trap etc

 

[Qwerty]

Some do, some don't. If you do, you will probably have to smooth tile adhesive over the cable on the former due to the gradient and SLC the rest. I have done both, but be mindful that as the former nears the drain it gets a lot thinner. This can cause heat issues with it giving off uneven temperatures in different areas.

 

[J Sid]

I have always done it, never had any problems

 

[J Sid]

Just need to check if you have used a tanking membrane it is ok with ufh.

 

[Old Mod]

It should be mandatory for every Tilers gravestone to read

" I never had any problems!" Till now!