Underfloor heating between joists

[Simon Dale]

Yes, 3_fall swears by it.

You might swear when you see the price.

Just looked 33

 

[Simon Dale]

And its 65mts

 

[Waluigi]

Might be worth checking to see if it’s definitely suitable for UFH.......beneath.

 

[Simon Dale]

Might be worth checking to see if it’s definitely suitable for UFH.......beneath.

Will do but I think the Giffa is the way forward. Im not paying so cost is no prob

 

[Waluigi]

Knauf Brio is another one to look at. Again, that is definitely suitable above UFH systems

 

[Simon Dale]

Knauf Brio is another one to look at. Again, that is defiejoy suitable above UFH systems

Seen it Just wish there were no underfloor heating systems that are considered not safe practice for us tilers

 

[Chalker]

I always bleat on about this, but just use Femacell flooring. Gives great conductivity for the underfloor and can be tiled straight onto.
I’ve done this numerous times, with no failures.
Ditch the ply

 

[Simon Dale]

Just an update. Builder spoke with Knauf today. He can use 18mm Giffa, not screwed into joists as it is floating. All I have to do is prime with their product no anti fracture and tile ???? I will do it

 

[Blunt Tool]

what’s your friends on TT saying about that then?

 

[Blunt Tool]

Is it thin porcelain, normal porcelain or stone? Use Tilemaster anti fracture mat no matter what, it’s thin and for hundreds could save thousands.
Not too sure about no fixings into joists tho

 

[Dumbo]

Just an update. Builder spoke with Knauf today. He can use 18mm Giffa, not screwed into joists as it is floating. All I have to do is prime with their product no anti fracture and tile ???? I will do it

Fix it to the joists . Stuff floating as it will and it will rock

 

[Simon Dale]

what’s your friends on TT saying about that then?

Not putting it on there

 

[Simon Dale]

Is it thin porcelain, normal porcelain or stone? Use Tilemaster anti fracture mat no matter what, it’s thin and for hundreds could save thousands.
Not too sure about no fixings into joists tho

Its planks, Ive emailed Knauf see what comes back

 

[Simon Dale]

Heres the reply ?
Good Morning Simon,


Thank you for sending us the photo- so for the GIFA floor system it is a floating system and doesn’t need to be screwed into the joists. Knauf flooring edge strips are to be used on the perimeter of the system to absorb any movement and stop the transfer of sound through walls if the floor does move/buckle. A anti fracture mat would substantially help, other than that this is all we advise for the GIFA floor.


Thank you for your enquiry,


Please do not hesitate to contact us should you need any further information.

Kind Regards

Sam Bunting

Technical Support Trainee

Tel. (+44) 08000 304 135

www.knauf.co.uk

Follow us on twitter @KnaufTechnical

 

[Dumbo]

Anti fracture to help with a buckling floor . It just shows these guys dont know what they are on about and just make it up as the go along