Underfloor heating problems!!

[ukProTile]

porcelainosa have just got back and said that they have sent the wrong addy and the butech rapiset will be fine for this project! aargghh! :mad2:

 

[Gazzer]

porcelainosa have just got back and said that they have sent the wrong addy and the butech rapiset will be fine for this project! aargghh! :mad2:

???? is that flexible.... i wouldnt like to use it if it wasnt ?

 

[ukProTile]

sorry i meant rapimax. Not sure if it's flexi but it must be!? still, poly pipe are now saying has to be mapei addy

 

[ukProTile]

cant find any info on rapimax?

 

[kilty55]

if polypipe have advised the mapei route of installation i would choose that route,ask for it in writing also

easier said than done i know especially when your dealing with stroodlepops

cant you stipulate to your customer that you want to use mapei materials? as advised

 

[ms.tiles]

hi
ive got a thread to post regarding a job with polypipe, i phoned polypipe before the job i did as the floor wasnt finished and was all over the place,really uneven.
i asked about slc and they said not to and unless i used 2 part adhesive they wouldnt guarantee it.
My problem is that the contractor said no to slc and got ardex x7001 for most of it then decided on some larsen slow set which i wouldnt use. i found that polypipe was hard to work with if its not put down on a level substrate or put down properly. even had to take up some of the plastic end pieces as they wasnt put down right and was higher than the boards plus the pipes was bent at ridiculous angles.
i wouldnt work with it again unless its put down by a plumber i work for.

 

[Ajax123]

Nowtofindthespacebar...... Lol