Wet room questions - Novellini Duodeck 3

[Chris Preston]

Hi there,

Read quite a few threads and still have a few questions.

I'm fitting a Novellini Duodeck 3, and then insulation, ufh, slc on floor outside deck. Then tank everything.

I've seen comments both ways about tanking over or under ufh/slc. Pretty sure both will work fine but happy to be corrected?

What would be the best tanking system here, recommended is RIW tilesafe but seen bad comments on here about it. Should I use waterguard, or bal tankit or wpc? Will the bitumen based membrane suffer from ufh?

Many thanks for any help.

 

[Porcelainwood]

It's quite a long video by may give you some ideas about using a membrane
Anwendungsfilm_Englisch from kiel/artwork on Vimeo - https://player.vimeo.com/video/95750351?autoplay=1&title=0&byline=0&portrait=0

 

[jobdone]

Water guard is much more user friendly.
Are you heating the tray? If not then you will need to set the tray higher to the level of the ufh/latex