C
cyclonebri1
Hi Chaps,
Doing a bathroom for my daughter. It's a substantially built house. The bathroom in question is about 2.4m x 3.0m, the large 9 x 3 joists the short way (gov spec ex police house).
I have completely ripped out the original flooring due to numerous chop ins over the years and redone it in 18mm T&G. Over this I've glued and screwed 6mm Noply board.
The floor is flat as a snooker table.
So don't want to waste money but want a proper job. Which grade adhesive should I be looking considering the above and also that very large tiles will be used????
Cheers fellas
PS, sorry I know this probably gets asked every week but..........................
Doing a bathroom for my daughter. It's a substantially built house. The bathroom in question is about 2.4m x 3.0m, the large 9 x 3 joists the short way (gov spec ex police house).
I have completely ripped out the original flooring due to numerous chop ins over the years and redone it in 18mm T&G. Over this I've glued and screwed 6mm Noply board.
The floor is flat as a snooker table.
So don't want to waste money but want a proper job. Which grade adhesive should I be looking considering the above and also that very large tiles will be used????
Cheers fellas
PS, sorry I know this probably gets asked every week but..........................