who uses a dremil

[Diamond Pool Finishers]

to cut floor tiles around soil pipes or what do you use??

 

[Gazzer]

Drilling porcelain tiles with diamond tile drill bit granite holesaws or grinder

 

[Ian]

I do own one but the replacement diamond wheels are a rip off so it never gets used. Diamond core bits and a grinder with a 110mm glass blade for all my holes and fiddly stuff.

 

[DHTiling]

Rotozip with diamond X-cut bit.

 

[tfs]

was given one from a plumber friend but never used it, need to investigate a little into bits available for the model that I have.

 

[Stewart]

Hole cutting kit from Diatec and a Rotozip.

 

[Gazzer]

Rotozip with diamond X-cut bit.

i have an early rotozip...well in fact I have two because they werent too good. But last year I bought some of the newer bits for it inc the diamond X bit but I still couldnt get on with it. Recently i have used it a few times to get over some problems and I am glad I hung onto it now.

 

[DHTiling]

I use mine a lot for shaping etc with stone..

 

[doug boardley]

dremmel bits won't touch porcelain, only good for ceramics or soft stone.

 

[DHTiling]

The X-cut eats porcs doug..

 

[doug boardley]

The X-cut eats porcs doug..

that's since bosch took over dremmel tho Dave, the old dremmel bits were great for soft tiles in my rotocut, but that went in the skip before the x-bits came out.

 

[terrygrant]

I use my dremel all the time, its especially usefull for cutting out grout (for repairs to other peoples work of course but I buy a set of about 20 diamond tipped bits for about £8.00 inc postage from ebay.......much more sensible than the official ones.
Terry

 

[doug boardley]

I use my dremel all the time, its especially usefull for cutting out grout (for repairs to other peoples work of course but I buy a set of about 20 diamond tipped bits for about £8.00 inc postage from ebay.......much more sensible than the official ones.
Terry

do they not chip the glaze?