F
Fekin
Since there's been a few threads on about what people charge and how some think we're undercharging, I thought I'd see what the pricing crew would give as a rough guess for an estimate.
Floors 1.
Down stairs toilet, has toilet and sink.
Bitchumen flooring, fairly level, has small alcove recessed where sink is "width of sink"
3 sqm
Customer does not want any sanitary ware removing so floor has to be cut around.
Bathroom 1
5.5 sqm, T&G floorboards under the carpet.
To be plyed out \ backerboarded, then tiled, same again must cut around everything, fairly straight forward square room, fit tile to carpet trim - re-hang door "might need cutting down to fit".
Bathroom 2
3.7 sqm , T&G floorboards under the carpet.
To be plyed out \ backerboarded, then tiled, same again must cut around everything, fairly straight forward square room, fit tile to carpet trim - re-hang door "might need cutting down to fit".
Bathroom 3
3,3 sqm, T&G floorboards under the carpet.
To be plyed out \ backerboarded, then tiled, same again must cut around everything, fairly straight forward square room, fit tile to carpet trim - re-hang door "might need cutting down to fit".
Tiles probably to be something like a 400 x 300 size "ceramic" stone effect.
All rooms have a shower unit so no tiling under baths and recutting panels etc.
So in all it's only just over 15sqm, but over 4 floors, lots of cutting around, so go on, what would you be looking at labour, you can do materials too if you want
Floors 1.
Down stairs toilet, has toilet and sink.
Bitchumen flooring, fairly level, has small alcove recessed where sink is "width of sink"
3 sqm
Customer does not want any sanitary ware removing so floor has to be cut around.
Bathroom 1
5.5 sqm, T&G floorboards under the carpet.
To be plyed out \ backerboarded, then tiled, same again must cut around everything, fairly straight forward square room, fit tile to carpet trim - re-hang door "might need cutting down to fit".
Bathroom 2
3.7 sqm , T&G floorboards under the carpet.
To be plyed out \ backerboarded, then tiled, same again must cut around everything, fairly straight forward square room, fit tile to carpet trim - re-hang door "might need cutting down to fit".
Bathroom 3
3,3 sqm, T&G floorboards under the carpet.
To be plyed out \ backerboarded, then tiled, same again must cut around everything, fairly straight forward square room, fit tile to carpet trim - re-hang door "might need cutting down to fit".
Tiles probably to be something like a 400 x 300 size "ceramic" stone effect.
All rooms have a shower unit so no tiling under baths and recutting panels etc.
So in all it's only just over 15sqm, but over 4 floors, lots of cutting around, so go on, what would you be looking at labour, you can do materials too if you want
