I'm Looking For This Tile Early 1980s Tile With Raised Knobbly Bits.

Search the forum,

Discuss Early 1980s Tile With Raised Knobbly Bits. in the Free Discontinued Tile Finding Service area at TilersForums.com.

A

Adam DIY

I am looking to find or identify a 50mm tile that was used on a swimming pool surround. It has angular raised bits to help with the non slip properties. Can anyone help?
Floor tile.jpg
 

Reply to Early 1980s Tile With Raised Knobbly Bits. in the Free Discontinued Tile Finding Service area at TilersForums.com

There are similar tiling threads here

  • Question
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper. A plumber/builder fixed...
Replies
1
Views
798
Good morning all. After a little advice. I'll post pictures a bit later. However.... The homeowner of the property I'm working on has just come to me and asked if anything can be done about...
Replies
6
Views
1K
  • Question
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in preparation for tiling. A couple of days after there's a lot of very fine cracks which have appeared, you...
Replies
5
Views
789
    • Like
  • Question
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for tiling.I have removed the floor boards and plan to lay 18mm WBP plywood.The question is, what...
Replies
1
Views
619
  • Question
Hi, I have a small en-suite 1200 x 2400, with a 1200 x 900mm linear drain tray which will have sliding shower doors. The tiles are 600x1200 blue/grey onyx style which I would like to look like one...
Replies
6
Views
1K

Advertisement

Top