Show Us YOUR Work Thread - Tilers Pictures

[Bubblecraft]

Finished my warmup & laminate job today. Day off tomorrow now! A few beers at the open mike night for me tonight

 

[charlie1]

What you can do with the DW24000 and a little imagination, first thing i did was rip some 305 wide travertine in to 100mm strips, then with a long 2 inch off cut i made a jig for doing the decorative cuts

then using the jig, i started to make the decorative border from the 100 x 450 strips of trav

then i ripped some more trave to 1 inch and ripped the corner off

then done some mitres. They are just placed in currently, wont be doing any more work on if for a week or 2 as other projects require my attention.

 

[Bubblecraft]

Nice work Mark!

 

[jonnyc]

In my experience of recent,anything to do with mandarin stone is is a nightmare

 

[NZ_Tiler]

I think this customer may be fond of the colour green

 

[rainsco]

the zement tiles are leiwand! are they from via? how would you call fugenschnitt in english?
i need for a comming projekt lots of cement tiles so i´m searching for alternatives to via.

 

[NZ_Tiler]

the zement tiles are leiwand! are they from via? how would you call fugenschnitt in english?
i need for a comming projekt lots of cement tiles so i´m searching for alternatives to via.

es heißt 'grout joint' I only layed the tiles, I will try find out where the tiles came from, but i know it tooks months for them to arrive.

 

[charlie1]

 

[Bubblecraft]

Nice work Mark.

 

[mz30]

just found this on my external drive from a couple of years ago

[video=youtube;aFJeL0OUr-o]http://www.youtube.com/watch?v=aFJeL0OUr-o[/video]