Next Project!

Rich Midge · Jul 1, 2016

This all seems a hassle for a 2metre floor! Just go with the Dunlop, its on your doorstep and it'll work perfectly fine. Slurry, slc, Set Fast Plus addy is half decent gear. I know tilers in north Wales who won't use anything but Dunlop. Given the size of the floor, once your slurry is dry mix the full bag of leveller with 5litres of water and pour, let it flow and you're good to go.

STEvieXE · Jul 1, 2016

Thanks for all the help so far guys. It really is appreciated.
I think I'll hit armatile tbh, I liked using the mapei before and maybe I'll give the Mrs a trip around the shops whilst there!

Do armatile sell eco prime t?

I have the vinyl lifted n 80% of the glue scraped off, would a grinder with a wire wheel be OK to strip off the rest?

So to plan if I totally remove the glue?

Eco prime t floor
Renovation screed SLC
Prime again? Using?
Keraflex adhesive? ( do I need keraflex maxi?)

How does that sound?

There is no fball and co in n.Ireland as far as I can see

Rich Midge, thanks for the alternative suggestion but I think it would be nice to skip the slurry coat stage and using mapei I hope I can stick to same brand of primers/SLC/addy etc

Spud · Jul 1, 2016

Yes if you get the glue off that is good prep, you dont need to prime twice once the renovation screed has dried the surface is fine to go straight on with adhesive

LM · Jul 1, 2016

Phone Boucher and if they don't have it they'll bring the Eco prime t up from Armagh for the next day

Flintstone · Jul 1, 2016

What a load of faf and waffle here, if it's flat, it doesn't need levelling, make a slurry coat or buy one ready mixed , let it dry then tile it, easy as that. No need to put any leveller on it

STEvieXE · Jul 1, 2016

Going to change plan!

Eco prime t as far as I know can only be bought in larger containers and as I'm only tiling 2/3 metres I don't want to pay that much and then throw it out! It is quite expensive!

Reading between the lines of this thread I've came to the following conclusions

- if I can remove 100% of glue I don't need a slurry coat and I can use any SLC ( doesn't have to be two part)

So I can sbr and use slc and then tile.

- if I can't get 100% of the glue removed I can either slurry coat and use any SLC and then tile

Or

Use a two part SLC n then tile

Am I correct in this?

Rich Midge · Jul 1, 2016

STEvieXE said:
Going to change plan!

Eco prime t as far as I know can only be bought in larger containers and as I'm only tiling 2/3 metres I don't want to pay that much and then throw it out! It is quite expensive!

Reading between the lines of this thread I've came to the following conclusions

- if I can remove 100% of glue I don't need a slurry coat and I can use any SLC ( doesn't have to be two part)

So I can sbr and use slc and then tile.

- if I can't get 100% of the glue removed I can either slurry coat and use any SLC and then tile

Or

Use a two part SLC n then tile

Am I correct in this?

Yes.

STEvieXE · Jul 2, 2016

And the Saga continues!

Went to tile shop number 1

Had no two part leveler or standard set adhesive and when I asked for sbr he asked me what that was! He then told me to try tile shop number two!

Tile shop number 2

Asked for leveller adhesive n primer

Brought it all out from back n put it in the car.

So I come home happy n inspect my purchases!
He'd given me a latex smoothing compound to bed trowelled on. So dubious of my trowelling skills I wasn't amused but thought lets try this!

Back to the floor, I taped up the door n got to work with my grinder to clean the remainder of the glue off. Went over the full floor and inspected after, all it really did was smear it around. So started to scrape again!

Scraped an hour and getting more n more annoyed, I read the instructions on the smoothing gear. It said can be applied over non soluble residue but no bitumen! My knowledge of glue residue being very slim injust got confused and angry! Boiled the kettle to try heating the glue n to my surprise it turned it white and made it bubble up and Easy?! to scraclean. I scrubbed the floor clean using clean water n left it to dry out.

I then decided to use the leftover SLC from my living room so I could pour it rather than trowel it. Primed the floor and out on the SLC and that's where I'm at now!

STEvieXE · Jul 2, 2016

LM · Jul 2, 2016

STEvieXE said:
And the Saga continues!

Went to tile shop number 1

Had no two part leveler or standard set adhesive and when I asked for sbr he asked me what that was! He then told me to try tile shop number two!

Tile shop number 2

Asked for leveller adhesive n primer

Brought it all out from back n put it in the car.

So I come home happy n inspect my purchases!
He'd given me a latex smoothing compound to bed trowelled on. So dubious of my trowelling skills I wasn't amused but thought lets try this!

Back to the floor, I taped up the door n got to work with my grinder to clean the remainder of the glue off. Went over the full floor and inspected after, all it really did was smear it around. So started to scrape again!

Scraped an hour and getting more n more annoyed, I read the instructions on the smoothing gear. It said can be applied over non soluble residue but no bitumen! My knowledge of glue residue being very slim injust got confused and angry! Boiled the kettle to try heating the glue n to my surprise it turned it white and made it bubble up and Easy?! to scraclean. I scrubbed the floor clean using clean water n left it to dry out.

I then decided to use the leftover SLC from my living room so I could pour it rather than trowel it. Primed the floor and out on the SLC and that's where I'm at now![/QUOTE

STEvieXE said:
View attachment 82621 View attachment 82622 View attachment 82621 View attachment 82623 View attachment 82624 View attachment 82625 View attachment 82626 View attachment 82627

well eventually your getting there, you seem to be on the home straight now

STEvieXE · Jul 6, 2016

Laid the tiles on Sunday, I primed the SLC, wasn't sure whether to or not but thought it (hopefully!) Couldn't do any harm.

8 hours! It took me to tile slightly over 2 metres! From starting to plan layout till tools away. Ungrouted!

Time's Ran Out · Jul 6, 2016

And what's your full time job?

STEvieXE · Jul 6, 2016

STEvieXE · Jul 6, 2016

I'm a panel beater

STEvieXE · Jul 6, 2016

I centred the tiles to the room. Looking at the doorway into the kitchen would I have been better to move the floor up a few cms to make the tiles more symmetrical in the door jam?

I was undecided but decided to go with the centred room plan

TF

TF

Spud

LM

Flintstone

TF

TF

TF

TF

LM

TF

Time's Ran Out

TF

TF

TF

Subscribe to Tilers Forums

There are similar tiling threads here

Advertisement

Thread starter

Thread Information

Thread Tags

Palace

Kerakoll

Ardex

Mapei

Ultra Tile

BAL

Wedi

Benfer

Tilemaster /Kelmore

Weber

Other (any other brand not listed)

Nicobond

Norcros