Search results for query: *

  1. N

    Looking for a hallway tiling, Millom Cumbria

    :) What type of tile would you like what’s your subfloor and when would you like it doing
  2. N

    topps tiles crystal anthracite Porcelain

    çanakkale seramik make them, you could try sourcing from ceramica impex in Leeds they are importers of kale stock.
  3. N

    Tiling On Floorboards

    2 coats acrylic primer cross coat between application to ensure full coverage. A decoupling Matt would be fine to use, Ive mentioned fast flex earlier, when used with a 3mm solid bed fixing trowel becomes a decoupling system as it contains a rubber instead of a sand, as you’ll have solid bed...
  4. N

    Advice for Wetroom Floor

    Waste of money even the reps & manufactures state it’s not worth using insulation Boards on wooden floors only need them on concrete floors. You won’t get a return on investment for years. The savings on a concrete floor, pay for the boards after 2 years. So what’s the stat for wood which is a...
  5. N

    Tiling On Floorboards

    Bal fast flex with a 3mm solid bed fixing trowel
  6. N

    Advice for Wetroom Floor

    Pointless using hardie & decoupling systems together A 10mm backerboard will only decouple and won’t give any structural integrity to the floor. It’s simply an water resistent overlay to stop tiles debonding. Both hardie, and ditra take out any minimal lateral movement. (Movement from left to...
  7. N

    Porcelain grinder blades and coring recommendations

    Rubi tcr and tva blade Rubi core waterless Easy gres drill
  8. N

    Red Gloss Floor Tiles

    Quartz can have UFH fitted to it as long as nothing is placed directly on top of it I.e the cupboards or a fridge so the main areas can be heated. To fit the tiles your best using bal PTB with AD1
  9. N

    chipping of tiles

    For a gringer use a RUBI TCR 115 Blade.
  10. N

    Slate job

    Prime with a acrylic or sbr primer and use a standard adhesive not need for flexi as it's concrete ensure the adhesive is grey to ensure no staining of the slate, then seal with an appropriate slate sealer or intensifier.
  11. N

    Split faced Oyster/Onyx tiles.

    Toppstiles do some stunning splitface tiles in a quartz and a slate worth a look!!!
  12. N

    Mosaic border not flush ?

    Should have used BEAVA MESH TO ADD THICKNESS TO THE MOSAICS, OR ADDED A THICKER BED OF ADHESIVE TO COMPENSATE THE DIFFERENCE IN THICKNESS.
  13. N

    what do you recommend.

    110V Site SAFE!!! 240V Residential!!
  14. N

    tiles stuck on top

    Ensure that the Vinyl is clean and grease free, then use a BAL Single Part Fastflex Adhesive which is an S2 classifciation adhesive which will out perform BSEN12004. Spec Taken From BAL "Most substrates including: Asphalt (suitable grade e.g. flooring), Concrete, cement:sand screeds and...

Advertisement

Top