backerboard

  1. A

    Wedi/Marmox on hardwall - dowels plus dot and dab or dowels plus full addy bed?

    Just about to line my en-suite out with Marmox boards onto the existing (new build) hardwall finish. Primed with Mapei G first and will use spankers/dowels but what's the consensus on dot n dab vs full bed of addy? Will end up with 300 x 600 9mm porcs on top, but the spankers are there to...
  2. S

    What do you use to mark wedi board

    Pencils are too dark .Just curious to know
  3. A

    Suitable Adhesive for Wedi board onto Hardwall?

    About to fit out a wetroom with Wedi board, it has very well cured Hardwall (12 months) on the walls which are flat and keyed. What's the best adhesive to bond Wedi board to it? (Boards will also get mechanical fixings but I'm worried about Cement based adhesives onto to Gypsum Hardwall....
  4. A

    Which non cement based adhesive for bonding Wedi board to hardwall

    Long time lurker first time poster I'm currently planning a wet room in an extension which was built a year ago. 3 of the 4 walls are thermalite with Hardwall but no finish plaster. The hard wall is very flat and keyed as my builder knew I planned to board out the room (it's also very dry as...
  5. M

    Wedi Installers Course

    Hi Peeps I finally got around to doing the two day Wedi installers course last week. Very interesting and well worth doing. They do two courses a month. Sharon
  6. S

    New to Wedi / Jacko, advice needed on uploaded pic please

    New to using Jackoboard and may have potentially dropped a bollock so wanted to check first. The picture is an internal corner where a 800x800 shower enclosure is going. I have joined the boards with boardfix / wedi 610 and pulled the washers down just below the surface so they have dished...
  7. V

    Chipboard + Marmox What adhesive ?

    Hi I need some advise regarding adhesive and primer to overlay 18mm chipboard floor with 10mm Marmox board. Tiles 60x30 porcelain I spoke to Mapei and they advised Eco Pro Grip +Keraquick + Latex - is that overkill? Also is it possible to use slow setting adhesive to tile on Marmox ,like...
  8. T

    Shower Trays - Marmox Showerstone vs AKW Tuff Form

    Hello all you lovely knowledgeable forum members! We are about to take on a bathroom refit, where one of the main reasons for doing so is to enable installation of a standalone shower (rather than just over the bath). It is a wooden floor, but the shower tray will fitted in a corner, and raised...
  9. D

    Where to get Wedi board

    Hi There Planning on using wedi board around a bath. I am having difficulty finding a supplier in North London. Anyone know any good places where I can purchase Wedi board? Also is it worth purchasing sealing tape? It is £40+ a role, are there any other options that are as suitable and work...
  10. K

    Building up on marmox for mosaics

    Hi all, My marmox shower tray is quite lower than my floor tiles since laid so is it ok to build it up with adhesive and shape to the drain prior to laying the mosaics. It's mainly on the back wall the porcelain mosaics are approx 8mm the floor tiles are 10mm and the difference from the shower...
  11. H

    wedi course

    Anyone done it? If so, is it worth doing and had any work from being approved? Cheers, Harry
  12. G

    Wedi board

    Hi all, Just curious to know what people think about using wedi board on floor boards/bathroom floors. I currently use no more ply 6mm glued and screwed. My local supplier does not stock no more ply but has got wedi board 6mm/12mm. Would the wedi board do a good job as no more ply or is there...
  13. JMC tiling

    dot n dab backer board onto brick

    Evening all. Got a job where I have to dot on dab some tile insulation backer board onto brickwork to build them out to the same depth as the existing plasterboard. I am going to mechanically fix them aswell but wanted to know whether to use plasterboard adhesive or tile adhesive on the wall...
  14. M

    Quartz tiles on tile backerboard, which adhesive is best?

    hi all I've got 36 m of 600x600 Quartz tiles wat adhesive best to use on backer board I was thinking single part flex as its a extension on to a salon 6 rooms in total so quite awkward cuts nothing square so I don't want to have to keep mixing up addy I
  15. macten

    wetroom floor with wedi - envelope the tiles still?

    Currently building wetroom with wedi gear. Floor tiles are 15x15 unglazed ceramic non slip (ugly!!) Only done a handful of wetrooms and the floors have always been large format (so envelope cutting) or mosaics. Should I still do what I normally do with bigger tiles and dry lay and mark falls...
  16. S

    Some Advice For Tiling Kitchen

    Hi 1st time post, newbie tiler after some advise. I am planning on tiling the whole of the downstairs in a 3 storey townhouse, total area is around 30 square meters, have ordered 33 square meters of this porcelain tile. The room is kitchen / diner / family room, with a cloakroom and hallway...
  17. C

    Marmox Multiboard - Priming

    Can anyone advise me on whether I should prime marmox multiboard with BAL SBR before tiling using BAL Single Part Flexible adhesive or can I tile straight onto the boards. Thanks
  18. S

    Hardie Backerboard Installation

    As a tile fitter only - as I don't get involved in room prep prior to tiling, would it be down to me to tape and fill joints between backerboards before tiling or would you expect the installer of the boards to complete this proces or inform me that this proces is required?
  19. I

    Wedi/kerdi/jacko/dukka/marmox - Any Real Difference?

    Hello, A bit confused with variety of XPS backer boards. Wedi, Kerdi, Jacko, Dukka, Marmox - is there any real difference in quality between them? I have used Wedi before, it is great, but it is twice more expensive. I will use it for porcelain tiles on the walls, if it makes any difference. Any...
  20. D

    Backer Board Or Not?

    Hi. I am pricing a small bathroom. It has been refurbished with new chipboard flooring. Do I need to use a backer board or will flexible adhesive cope? There's not much movement and the new boards are level. There are two steps into the bathroom so a doorway is not affected by levels. Advice...

Advertisement

Top