door

  1. B

    floor finishing at a door.

    How do you finish at a door if you have overboarded with ply or hardie backer? 1.do you leave it for the customer to get a finishing trim? 2.finish using a specialized trim? 3.finish with a nice piece of wood? 4.or other? I generally offer customer a trim and fit it.:thumbsup:
    • brian c
    • Thread
    • door finishing floor usa
    • Replies: 8
    • Forum: UK Tiling Forum
  2. C

    which door theshold !

    hi fellow tilers need help ive tiled a hallway floor had to use 18mm ply for reasons i'll not go into (to long a story) which meant when i got to living room floor (which was real wood flooring) i was 20mm above it. tryed useing a trim with plastic plugs that knock into the floor and adjust to...
    • caliperkid
    • Thread
    • door usa which
    • Replies: 8
    • Forum: UK Tiling Forum
  3. T

    Shower Door

    I'am on a Travertine Bathroom at the moment which is tiled to 1200mm all around the room and fully tiled in the shower recess. The top half of the walls have been plastered so you can imagine how much fast set flexible adhesive I am using to keep a vertical level on the bottom half! Well I'am...
    • Time's Ran Out
    • Thread
    • door shower usa
    • Replies: 6
    • Forum: UK Tiling Forum
  4. A

    Tiling round door problem.

    Had a bathroom with walls in bad condition and totally out of alignment.Decided with the customer to have the walls completely boarded out with plasterboard sheets dot and dabbed.Job done well, all level.However I and customer were aware there would be a problem round door as door architrave...
    • A1P
    • Thread
    • door problem tiling usa
    • Replies: 17
    • Forum: UK Tiling Forum
  5. E

    Door Trimmer.

    I have a Karlton door trimmer and you cant get them anymore, they are so good i use mine nearly everytime im tiling. I have found this site that sells similiar if anybody interested. I charge £15 per door to trim and its quicker than removing and planing the bottom off. The web site is...
  6. B

    Looking for a Door Bar!?!

    I'm after a brass door bar to cope with a 20mm drop from tile to wood floor. I found one at the local trade flooring place, but they wanted £20! So, i'm looking for a cheaper alternative.. Any suggestions?
  7. P

    Height problems door bars

    How i solve the height problems with over boarding find myself a nice peace of oak or whatever matches http://www.tilersforums.com/members/pjc-albums-pete-picture6170-door-bar.jpg
    • Perry
    • Thread
    • door height problems usa
    • Replies: 8
    • Forum: UK Tiling Forum
  8. F

    A bit 'different' door trim

    Anybody like these made for carpet to vinyl really but as they have screws every 6" under the inset, it made a neat 'ramp up' from carpet to tile (about 15m) Won't suit every taste but went better with Trav to light brown carpet better than brass or aluminium.
    • faithhealer
    • Thread
    • door trim usa
    • Replies: 4
    • Forum: UK Tiling Forum
  9. D

    can the last tiler on here turn the lighs off ,lock the door and go to bed , night,ni

    :8::8::yikes::incazzato::drool5::lol::lol::lol::smilewinkgrin: :thumbsup:
    • Diamond Pool Finishers
    • Thread
    • can door find a tiler last off tiler tilers directory usa
    • Replies: 5
    • Forum: UK Tiling Forum
  10. Sean Kelly

    Trimming a fire door with Karlton kdt184

    I will have to trim about 10mm off the bottom of a heavy fire door. I have purchased a new toy, a Karlton KDT184. Got it off ebay for £106. 110v used twice. Can't wait to get my hands on it. Agred a price of £25 for the first door and £10 for any other doors that need cutting. Do I need to know...
  11. C

    Tiling around the door space

    Hello everyone, Sorry to keep asking questions........as soon as I move on another one crops up! This time I wondered what the general rule is about tiling into the door space? Should I tile half way into the door frame or keep the tiles to the same level as the wall? Many thanks...
    • cgadmin23
    • Thread
    • door tiling usa
    • Replies: 2
    • Forum: UK Tiling Forum
  12. B

    can I cut a door frame

    Hello all, Just wondering if it's ok to cut off all the door frame/architrave etc from the bottom of a door and slide a tile under rather than doing a very tricky and time consuming cut? I'm using large tiles and going from one room into another. Is the frame bearing much weight? Many...
    • brendanbreeze
    • Thread
    • can cut door door frame frame usa
    • Replies: 9
    • Forum: UK Tiling Forum
  13. D

    Shower tray & cubicle door

    At some point this year, I will have my en-suite shower room re-tiled. In preparation for such a fabulous event, I want to start looking around for a new shower tray and cubicle door so that the old ones can be binned. Having started to look around at prices and quality, I am seeing that...
    • Deleted member 9966
    • Thread
    • door shower shower tray tray usa
    • Replies: 4
    • Forum: UK Tiling Forum
  14. H

    Door stop thresholds

    Need 2 door thresholds, not sure what i need exactly? will be 9 mill tile, and say 5 mill adhesive bed cheers
  15. J

    Have 9'x9' cement covered patio. We open the door, mice run off the patio. What mouse

    I recently had my back porch redone with a half porch half covered screened in patio. To reduce costs I told the contractor not to put anything on the flooring - so now it is up to me to finish the project. I have a 13x8 covered patio that will recieve some moisture and rain due to being outside...
    • james.link08
    • Thread
    • cement door have off patio usa what
    • Replies: 10
    • Forum: UK Tiling Forum
  16. F

    Trimmed the wrong end of the door!

    My first attempt at door trimming went horribly wrong today after taking the mesurements...securing the door to saw horses and marking i proceded to cut with circular saw...found this a mission to use was a huge 230mm Makita from a hire shop 40Teeth blade...i secured straight edge to door...but...
  17. E

    No screw door stop on tiles with UFH

    I need to fit a door stop on floor tiles with UFH. A couple of months ago I found a web site advertising a range of stops designed to be fixed without screws. Unfortunately I'm now unable to find the site. Can anyone point me in the right direction or recommend a no-screw door stop.
    • ErnS
    • Thread
    • door tile tiles ufh usa
    • Replies: 20
    • Forum: UK Tiling Forum
  18. C

    door reveal advice

    tiling a bathroom floor and just wondering how far into the reveal to go with the tiles? it is carpeted on the landing so would need a carpet to tile trim. can you get them in topps and also what one is the best. obviously i dont want to put the tiles down and then realise the trim wont fit. any...
  19. S

    Tiling around an access on floor (trap door)

    Hi folks, I have a small area inside the front door of my house i would like to tile, It is on two different levels so i would need an edging strip. Another thing is that there is also the access door for turning off stopcock etc and this is also the only underfloor access. How do i finish...
    • Scottyboi
    • Thread
    • door floor tiling usa
    • Replies: 3
    • Forum: UK Tiling Forum
  20. kilty55

    step door trims??

    evening,i need advice on where to buy a trim for a small lipped step up from a vestibule tiled floorup about 4 inches to meet another tiled level floor,,hope that explains it?? it needs to be chrome do ctd sell these or schulter systems would that be a good bet? not used any of these yet so need...

Featured Threads

Advertisement

Tilers Forums UK | UK Tiling Forum
https://uktilingforum.co.uk | UK Tiling Forum
Back