I've been tiling a friends bathroom with my partner and have ended up with a difference of about 20mm on the length of one wall. We weren't sure of the best way to go about the job, but we started with a full tile in the most visible corner of the wall and ended up with roughly 75mm tile at the...
Hi
I have slowly been completing my wetroom refurb. and just about finished. Floor laid (but not grouted) and all but bottom row of walls. Before finishing I want a full belt and braces to prevent leaks. Shower marmoxed and joints tanked with Mira products. Was also going to silicon the gap...
I am sure there is something I am missing and being really stupid. I have to tile around and about a window, I have tiled up to the edge of the window and now about to tile inside & about the shelf edge.
I have purchased Homelux 9mm chrome tile edge and trying to work out the miter on the 90’...
Hi ready to grout my tumbled marble install customer has decided not to put skirting on and not to seal with silicone she wants me to flexible grout around edge! whats your opinions!!
looking for some help, its stainless, genesis dont do corners for this and i want to do a three way joint, its a different profile to normal square, i think its 10mm x 6mm any ideas appreciated.
Evening all
What do you guys use as a straight edge to run across up the wall to start your first row of tiles.. (to rest on also)
I cant screw anything to the wall as its tanked
I have a couple of those rubi stands, just need something to put across them to get level
Before you say batten...
davemul
Thread
edge
find a tiler
straight
tiler
tilers
tilers directory
usa
if anyone is needing to roundover stone/granite edges ive just used a company in kent DK HOLDINGS LTD.they supply all types of cutting polishing gear.i used a large router bit on a grinder with 14mm thread to finish slate slabs, perfect finish.the catch is £100.00 +vat.if used regularly may...
Hi Folks, hope we're all well. Having a problem finishing a slate job as my now beautifully level floor (with ufh, board etc) has created a sloping step into hallway ( hall floor is well off level). Was originally intending to use cover strip but it looks naff. My problem is that as the edges...
Good evening,
I'm trying to source a chrome or similar edging strip but i need a minimum length of 270cm and can't find a supplier. Any suggestions please?
Also, i have a box section to tile which will have 2 x rows of 400x600 tiles from the floor and then 2 x rows of decorative 7.5x7.5...
I have bought some tiles at last for the utility room. I have a bit of an issue at the door threshold to the outside passage. As I have had to level the floor by about 15mm I have now not got enough room to put the tiles and the addy down in the threshold without breaching the height of the door...
Hi,
I have recently purchased some Limestone tiles from a supplier on the internet. The tiles have now arrived but the quality of the cut seems poor.
The edges of 99% of the tiles contain at least one chip, lots of the tiles have small pieces of the corner missing.
Having never purchased...
darker
Thread
edge
help
limestone
quality
required
tile
tiles
usa
I am tiling a bathroom and would like to avoid using tile trim. I've been searching for glazed edge tiles and have only found non-vitreous tiles from villeroy & boch which have glazed edges. However they are smaller format tiles and I would like the larger more modern style tiles. Does anybody...
Hi
I'm doing a little diy tiling and need to ask about the best way to do corners with the plastic tile edging. I don't have a problem with a window with the 45 degree cuts to make a square edge. The real problem I'm having is a wall that is half tiled and goes around into the window. This...
Hi all,
I am looking for a tile edge which I can put on after tiling. I couldn't make my mind up which one to get before my tiler done the job, so now I am after something that will finish off the look. The tiles are floor to mid-height of the ceiling, so just shy of much eye level.
I was...
This is a follow on from my last post.
located here
http://www.tilersforums.com/electric-underfloor-heating/34764-big-uf-tiling-insulation-question.html
So I lifted the old terracottas, levelled using slc (good enough for the insulation boards to be laid), laid the insulation board (10mm)...
disco
Thread
edge
porcelain
porcelain tile
porcelain tiles
tile
usa
we all know these tiles, 150 x 70, 15 mm ish bevel. I've done white before with white grout and silicon and black tiles with black grout and silicon. Currently doing black tiles with white grout. My concern is the corners where the gap fluctuates between 2 and about 4/5mm because of the bevel...
Hi Everyone,
With this kind of travertine being laid in the french pattern, how do you accommodate the smaller square tile in the pattern?
On dry laying the tiles, the smaller square seems to be the one that throws the grout joints out. Am i'm right in saying that the smaller square should be...
peegee tips
Thread
edge
grout
joints
pattern
tile grout
travertine
usa