Have just started our en-suite, knocked all the tiles off the wall, taken up the floor tiles including the over ply that was underneath, shower tray and eclosure will be next, ( wanted to leave this until we had the new one ready to go in, less time without a shower ).
Thinking ahead regarding...
Hi there,
We have what we think is limstone flooring, with underfloor heating in a some portions (not all areas have UFH).
We are not fully informed as this was part of a refurb that the previous home owners undertook.
The floor was installed about 3 years ago, but this last winter onwards it...
NaturalStoneFloor
Thread
aus
crack
cracking
debonding
floor
floor tiling
flooring
ufh
usa
Hi, I have a traditional 1960 house, I am adding an extension and I am paying a professional to tile 35sq m with marble, we have taken the floor back to joists, I am installing water based underfloor heating, the heating sits on insulation and the spreader plate will be in contact with the...
Hi guys have always over plyed chipboard flooring prior to tiling but what is the reason for this if chipboard was primed would it be ok.
Other theories are easier to strip flooring at a later date please enlighten md ..brum
Hi
Building an ensuite and have put 300 x 600 x 4.5 mm tiles in the shower cubicle. They look really good and am thinking of using then on the ensuite floor too. However my mate thinks their too thin for use on floors, despite the box saying they're made for walls and floors.
Anyone used this...
Crispin
Thread
aus
floor
floor tiling
flooring
porcelain
porcelain tile
porcelain tiles
tile
tiles
usa
Hi,
I have some large format (50cm x 50cm) travertine tiles being laid next week and I've just laid the floor in preparation (Bathroom). I've removed all the old floorboards as they appear to have been badly damaged during previous installs and replaced with new 22mm chipboard and then added...
AlexT
Thread
aus
floor
floor tiling
flooring
tile
tiles
travertine
under
usa
Has anybody come across this flooring stuff called karndean flooring it's well popular around my neck of the woods so thought I'd try and find out a bit about it
Hi all,
This is my first post and as you will see I am not a tiler and have little knowledge. However I am hoping some of you might be able to help me out with a huge problem i have had over the last 3 years!
Ok so where to start, we moved into a brand new house three years ago, everything was...
Rnessbert
Thread
advice
aus
floor
floor tiling
flooring
laying
problem
tile
tiles
usa
Hi
I am replacing some 18mm chipboard flooring in the bathroom.
I will be fitting 6mm cement board and ceramic tiles over the new chipboard flooring.
In the picture of the bathroom below, on the left hand side you can see the chipboard flooring for the bedroom.
The chipboard flooring you see...
We have moved into our new house and I am about to put some floor tiles down. The house flooring is 22mm water resistant chipboard. I planned to put down 6mm no more ply rather than 18mm ply to keep the finished height of the floor down to as close to carpet level as possible. Thinking of the...
rdmbfossa
Thread
aus
floor
floor tiling
flooring
replace
tiled
usa
what
I have just been to price a floor in a nail bar. They have amtico down and by eye I can tell the SLC was just done to give smooth surface.
Im pretty sure they wont go for it but Ive got to work out a price. probs around 60m2.
Whats the best thing to do with this stuff?
Im assuming lift...
cam_low
Thread
advice
amtico
aus
floor
floor tiling
flooring
substrate
usa
hi
im after a bit of advice, were looking at getting our bathroom tiled both floor and walls. The bathroom is 3 mtrs x 2.5 mtrs and is waterproof chipboard floor, the house is only 2 years old.
Now i want to be prepared for when i get tilers round so that know what to ask from them and have a...
bret.c
Thread
advice
aus
chipboard
floor
floor tiling
flooring
usa
Hey guy's, i've not been on in a little while, been stupidly busy... Just after some advice, as i'm thinking about getting a laser for help with setting out floors. I've never really bothered with lasers before, but have quite a big floor coming up (an entire ground floor), and want to get the...
Hi Guys (and gals),
Im tiling an upstairs bathroom floor at the weekend and wanted to double check im not going to mess it up!
The customers tiled floor is cracked and you can feel quite a bit of movement in the floor (no wondering why the tiles cracked then), so i am going to assume that the...
I recently made our archway from the livingroom to kitchen wider and no longer a arch to let more light in the kitchen....we have some strips of Karn dean left over quite a few spare strips. it looks like the floor has been self levelled and then stuck down...if i remove the cut pieces or...
Martino
Thread
aus
best
best way
floor
floor tiling
flooring
repair
tiling
usa
whats
Hi everyone. Have been working on a quote for a bathroom for a customer of mine. She is disabled and in a wheel chair. They have just bought a place near Blackwater and have asked me to quote on the bathroom. It has recently been refurbished before they bought it but is not suitable for them as...
kitchensofdesir
Thread
aus
cornwall
floor
floor tiling
flooring
needed
usa
wall
Thank you for viewing this thread.
I am currently working on a job and upon pulling the lino up we discovered the chipboard floor has been water damaged due to two leaks which have been fixed.
Now this chipboard floating floor is in a flat and water had leaked into the flat below at some...
kickkick
Thread
aus
chipboard
damage
floating
floor
floor tiling
flooring
usa
water