former

  1. J

    Upstand shower trays

    Hi. Just thinking about shower trays. Do shower trays with an integrated upstand require sealing where tiles sit upon the tray? I wondered if this type of tray (if Silicon is not required) would be better suited to a bathroom that has a history of Silicon going mouldy where the tiles touch...
  2. D

    Shower glass pane against skimmed wall and up against tile edge.

    Hi all, This forum has been a wealth of knowledge for me while i tackled our new build. A quick question please regarding wetroom wall tiles and a glass partition. Where the wall tile meets the glass partition (tile will finish here and not go beyond the glass), do i finish the edge of the...
  3. C

    Tiler required to fix badly installed shower - Canterbury Kent

    We paid to have a new shower room installed just over 2 years ago. They fitted a false plasterboard wall in order to make a smaller shower base fit more easily and then tiled straight over the plasterboard. Recently some of the tiles have fallen off the wall (600x300). I removed the front of the...
  4. N

    Advice please - Epoxy resin shower corners

    I have been searching for information on internal corners joints for shower. I have epoxy resin which I have used to join mitred tiles on a difficult angle external corner. Is I OK to use epoxy resin in joint on internal corners? I plan to use epoxy grout for remainder of shower. The shower has...
  5. S

    Mastik failing quickly in marble tiled shower

    Hi, I recently had a contractor strip out and replace all the Mastik in my shower as it had failed. It was a very poor job and not colour matched. The new contractor did a good job, or appeared tom with a matched colour (Jasmine) but less than two months on it has completely failed, coming away...
  6. S

    Tanking shower walls and sealing around the existing shower tray

    I have just joined the forum and I'm hoping for some advice. I had a leak in my shower which now needs retiling. I have replaced the area of water damaged plasterboard with a sheet of aquapanel. The shower tray is remaining in place and I am now planning to tank/waterproof the three walls that...
  7. S

    Internal shower and niche corners..Grout or sealant?

    What would you guys recommend to finish the internal corners on this niche? Grout or sealant? The niche is inside of a shower cubicle Already grouted the corner of the cubicle then thought maybe it should have been sealant instead. That can be corrected if need be but wanted to double before...
  8. I

    Advice on new tiled shower stall - thermal insulation, embedding shower pan

    Hi, New to the forum. I'm going to be installing a new corner, shower unit with tiled walls, glass doors and acrylic shower pan, as part of a bathroom re-modelling project. I'm not a pro. Would appreciate expert advice on several points. The new shower will replace an old 'one piece' molded...
  9. A

    Best shower former for wetrooms 2022

    This is something that's been causing me a bit of a headache these past few weeks, deciding on which shower former and tanking solution to go for on a timber floor. I was pretty much sold on The Impey Linear 4 former and waterguard kit in the beginning but been looking at other options. I've...
  10. R

    Shower Pan NOOB needs Adult Supervision

    First time renovating a shower, had a few silly questions. - is adding one layer of 2x2 on top of the flat 2x4 sufficient outer lip (on the three sides without a curb) for my pans mud beds? Shower is 5x3.5 so 2.5’ from drain at longest point. Do I really need 2x6 perimeter if I don’t plan on...
  11. P

    Quartz tile in shower

    please can I ask if quartz tiles are suitable for inside a shower cubicle. Do they need any special treatment? And do I need to look out for anything in particular? Thanks
  12. C

    Tanking shower area on new plasterboard and skim

    Hi, trying to find my way around this question. We had a new bathroom built, it was plasterboarded and skimmed in September. We're now ready to install the bathroom suite and tile. I understand that I should drank the area around the shower/bath before tiling. Can I apply the liquid waterproof...
  13. M

    Issue picking grout for my polished san dona marble hex shower floor

    Hello everyone I have a question I have installed hex polished marble san dona tile in my shower floor and 3x6 on the walls. I'm not sure what to use on the floor for grout sanded or un sanded.... I have ~1/8 joints. Thanks for the input
  14. S

    Shower tray install on tile adhesive

    ive got a plastic (i think its acrylic) shower tray. Its not one of the heavy stone resin type. Anyway im going to lay it on a bed of flexible tile adhesive and wanted to check, when laying the adhesive out on the floor do you guys comb it out using the notched side of the trowel or just lay a...
  15. Oakamoor

    Advice on shower install

    I've had first fix done on a bathroom renovation, my plumber advised I tank the walls before tiling, but I'm concerned about the walls. The area behind the shower used to house a water tank and lots of the plaster is shot, surely this is not a good idea to tile on top of?! I will be removing...
  16. A

    Actual regulations on tanking walk-in shower?

    Hi, So I've looked about and read a few things regarding the building regs (BS 5385-1:2018 clause 6.1.1.3). I'm just a bit unsure as to how high the tanking has to be up the walls for it to be legit? I'm looking at getting an Impey Linear 4 shower tray and I know they have their own Waterguard...
  17. B

    Tanking past tiles and shower tray

    Hi, I’m tiling wall first then fitting enclosure but tanking before the tiling. My question is if I’m tiling behind the frame but only the width of the frame What will stop the water if it gets behind the tiles, running down the wall to the outside of the shower tray? Hope you can help Ben
  18. N

    When to apply grout to shower walls & floor and bathroom floor tiles

    Hello, I'm renovating my 2nd floor master bath. I'm about to lay down tile in three areas... on the shower floor first, then the his and her side bathroom floors, and finally the shower walls - in that order. My question is... Should i grout immediately after each tiled area's mortar it...
  19. H

    Contour disabled access shower doors

    Hi all. Fitting contour disabled access half height , bi fold shower doors for parents. Lining up with shower tray and there's no joist where the U metal compensator needs to be fixed to tile on pb wall. Instructions say drill hole with 10 masonry bit and use wall plugs supplied. Screws are 8 X...
  20. B

    Shower tray squeaking since tiling

    I have a recently installed Mira Flight Low tray that was absolutely solid for 2 months, no squeaking or creaking. Shower hasn’t been used yet as waiting for bespoke screen. Tiler came and tiled down to tray and tiled nib wall next to it. A few weeks go by and the other night I stepped on the...

Advertisement

Top