Morning all,
Just wanted peoples thoughts on finishing metro tiles, specifically in the corners? Even with nice cutting you still get a diamond effect in the corners that in some cases depending on the depth difference of the metro edge can look a bit off. Do you guys scribe in to minimise this...
Hi
Does anyone on here have experience of fitting these type of tiles. I'm quoting for a job for October time which involves these tiles. Its a bathroom that's going to be tiled half height. tiles will be below window and bath is freestanding so they will not really be in the wet area. I'm...
Good afternoon!
Hopefully someone here can point me in the right direction.
I'm about to start tiling in between my worktops and wall cabinets in the kitchen. The problem is the walls are all over the place!
My thinking was to true the walls with plasterboard and tile over that, would this...
morganste
Thread
canada
first
metrometrotiles
tile
tiles
wall
walls
Hi all,
I am currently tiling my bathroom in 200 x 100 white metro tiles. I have a sloped area to do approximately 45 degrees. The wall had tiles on previously that have been removed leaving the plaster in a reasonable condition. Can anyone advise if I am ok to reapply the new tiles without any...
Just looked at a splashback job and the customer wants white 200 x 100 flat, not bevelled.
Problem is (as I can see) is the measurement between the worktop and the horizontal angle bead on the window cill is 215mm, which will become about 225+ after the cill is tiled - she doesn't really want a...
Evening all.. Interested in people's methods of avoiding a protruding cut metro tile on an upright edge trim. Never had a problem before, but last customer was unhappy with protruding cut edge as the trim was the same depth as the bevel uncut edge. When tiling these in brick fashion, obviously...
Evening guys and girls.
looking for some help sourcing a tile, decorative ceramic or something to finish the edge of metros.
I have the situation of a half tiled room in white metros. Only theres a shower cubicle where it will be fully tiled. I'll post a picture later if I can.
the metros...
Hello, this is my first post on here.
Just a couple of questions,
Firstly I'm tiling my bathroom with 100x200mm metro tiles.
I've used the same tile in my kitchen, now my question is what's the best way to straight cut them.
I used a cheap plasplug wet tile cutter and I hated it, absolutely...
Basssound
Thread
aus
bathroom
cutting
grout
metrometrotiles
tile
tile grout
tiles
usa
which
Hi there,
I am at a loss about how to go about figuring out the reason over 50 tiles on the wall of my newly installed shower have cracked.
The tiler has been round and was non-committal about the reasons. Hopefully you guys can help.
The bathroom was finished 3 months ago and within...
Hannah
Thread
aus
ceramic
ceramic tile
crack
cracking
debonding
metrometrotiles
tile
tiles
usa
wall
Customer has asked to re-tile a shower cubicle with Metros, just thinking about the bevel effect on them and how you get the shower cubicle to flush seal up against them?
Anyone ever fitting them in a shower cubicle?
Cheers
Hi,
Quick question regarding metro tiles. If the walls are relatively flat and tiles aren't bowed, will there still be a problem with lipping if done brick bond with the tiles being a smaller format (200x100)?
Cheers for any replies.
Hi chaps
I have a small splash back to do, 200x100 ceramic metro tiles. It's mainly brick wall.....some render, a ply box and some of what looks like Caber board on the wall. What would be a recommended adhesive for this ? Also.....I need a fine grout as not to scratch the tiles, help please...
Dude
Thread
aus
metrometrotiles
tile
tiles
topps
topps tiles
usa
Hi all, Got to do a kitchen this week. Here's the trick, there is a window ledge that is exactly one tile (20x10 Metro bevels) high up from the worktops. Which sounds perfect, but what if, and I haven't checked yet but, the socket height falls bang smack in the middle of the third row up. I...
Firstly, apologies if this has been asked before or I'm posting in the wrong section.
My kitchen is being re tiled and we have requested white Metro tiles from Topps and thought a dark grey grout would look good.
today the builders have informed me that 'the dark grout will stain the white...
Zuffler
Thread
aus
dark
grout
metrometrotiles
tile
tile grout
tiles
usa
white
Went to a job today to fit above tiles.
Turned into a right disaster.
The customer, a mate, painted some of the new plaster walls with some paint to help the adhesive, got this stripped & rest of the walls prepped & started to open boxes of tiles.
Out of 3 boxes (75 tiles) I would only have...
got a job about to start .
got loads of metro 150 x 75 mm tiles in all bathrooms.
any recommendations for a good cutter to buy.
all my other cutters are for large format.
have seen the sigma 3lm max cutting to 520mm on tradetiler .
would this be the best for raised metro tiles
jonnyc
Thread
aus
best
cutter
metrometrotiles
tile
tile cutter
tiles
usa
Hi,
Looking for some ideas about what could have caused our lovely glass tiles to look like they are either wet behind them or the backing coating is dissolving away.
At first we thought they were still drying out but as the weeks have progressed there are more and more 'patches' where it looks...