no more ply

Hi all... The floors in my wet rooms are 24mm ply,glued and well screwed down should I be considering using a 6mm tlle backer board on the floor also before tanking it or is it good enough to go straight off the ply... Thanks in advance...

Hi All Ive not been on for a couple of years. The last time I was tiling a full bathroom at home and found your advice fantastic, (must get some pictures uploaded) Well I have moved house from York down to Surrey and guess what its DIY bathroom time again. I have re-screwed down the existing...

As above i have 12 6mm no more ply boards that are up for sale due to a change of plan in new house. £80 Collection is from haydock

Hi all, Im in the process of renovating our bathroom and needed advice on screw sizes for 18mm ply which will be screwed into the joists and then 6mm nomoreply which will be laid on top of the ply (I know.... the irony...). If someone could advise me on screw length and thickness I'd be very...

Can someone tell me whats the difference-if there is one- between these two? also which one do people recommend and also I need to put one of these on my bathroom floor before i tile what thickness is recommended and how are they installed. P.S im a DIYer but can do most jobs and not a beginner...

Been in to my supplier today and noticed a pallet of the above in 1200x600 boards. Apparently it is still under test so not yet for sale, but it will be suitable to fix on joists and tile directly on it. This would solve a lot of height problem issues between rooms. I've searched to find if...

Can anyone recommend a good well priced tile shop than sell no more ply boards , as over here in ( n. Ireland it's hard to source! Cheers

I've been to price a job today and the customer has already bought all the materials for the job, on the advice of the supplier. They have bought 'No more ply' to overboard the floorboards, which is pretty solid just a few areas to deal with. However I've never used NMP and I just wondered if...

Hi All, Firstly this is a DIY question, not a for reward question. I'm re-fitting my bathroom but like to do things right :) I have already finished the electrics and boarded the head of the bath where the shower and screen will mount with Hardibacker 500 and fixed at 150 mm intervals with...

Hi, Planning to tile my bathroom in the next few weeks, the floor structure is chip board on the new extension size and floor boards on the old part of the bathroom. The floor is solid and I'm planning to put 6mm no more ply glued/screwed down. Do I really need to put Ditra mat down? Part of...

Does anyone use a primer with No More Ply before tiling, the booklet with it recommends SBR latex based primer. I've still got some Mapei primer G leftover from doing the walls , would that be acceptable to use instead or would it be best to get some SBR anyway? Thanks for any info

Anyone ever used it? sales man was showing it to me today, its a cement based board, basically a cheaper version of hardie backers, they felt quite good quality and hes doing them me at £8 a 1200x600 sheet. he recons to stick them down to floorboards with tubes of this super strength adhesive...

Hi all, just reading up on no more ply and it sounds like just the thing needed in a wet room im doing next week. Its a loft conversion and the flooring is that moisture resistant chipboard, I cant increase the height by much so 6mm nmp would be perfect i reckon, any idea where i can get it near...

I need to order some no more ply and get delivery to Aberdeenshire. The best price on the internet appears to be comparetiles.co.uk. I just wondered if anyone has used this company and has any positive or negative feedback? Or are there any sponsors/advertisers on this forum that would like to...

Hi Folks I'm looking for some advice. I have spent a lot of time searching for my exact situation and haven't found a definitive answer. Here's what i've got: -200mm x 50mm Joists on 300mm centres, 12ft span -18mm Green Chipboard -6mm No More Ply, screwed and glued with the manufacturer...

no more ply have recently added a new board, so heres an updated version NO MORE PLY Technical Helpline: 0800 009 4354 W The Home Of No More Ply No More Ply is classed as a ‘Tile backer board’ that is ideal for over boarding floorboards, timber, chip...

well the floor is laid as best as possible, not having the pleasure of my bath sink or toilet removed prior to board laying i had to do the best that i could plus also the walls not perfectly straight, i used plenty of of mega adhesive and screws my question is the screws i cannot get perfectly...

Hi All I am starting to tile my bathroom at the weekend after fitting no more ply to the walls around the bath. On their website it says to prime the boards for better adhesion. What do I use, or does it depend on the addy I am using...? ps. I know PVA is a defo no-no...

I'm going to be boarding my bathroom with NMP ready for tiling. I've taken the walls back to breeze block but am unsure which adhesive to use. The NMP adhesive seems really expensive so was going to use a 'single part flexi rapid set adhesive' as specified on the NMP website. Does anyone have a...

i ordered a pallet of 6mm no more ply today anyone got any feedback on this product got a better price than my usual hardibacker price