off

  1. R

    Blade starts to walk off centre?

    The cutting of Porcelain tiles, 16mm, with a Vitrex bridge saw, has been very successful, holding cuts of 900mm to 0.4mm. BUT All the blades I have tried, ATS, Marcrist and Rubi, have all started to cut off centre. I have dressed the blade with a Rubi cleaning block and this will improve...
  2. R

    Vitrex Ulitmate blade walks off line

    I am cutting 16mm porcelaine paving with a Vitrex bridge cutter. I fitted a Vitrex Ultimate blade to replace the standard blade. It cuts better, with less chipping but on a 600mm cut it walks off line by 3mm. The saw runs true and the standard blade cuts true but it chips like a MF. So any...
  3. Balloo

    Ardex Ardex grout nightmare to clean off

    Ardex is not as good as it used to be . I find it very difficult to clean off the tile. And efflorescence is shocking
  4. E

    Off White shower grout with black spots !

    Hello, any ideas what maybe causing this stains in a shower grout and how to get rid of them. The grout was Sealed about 3years ago. Thanks.
  5. Wayne Brown

    Sacked work off today.

    Started my holiday early and had a day fishing on a local beach now off for 14 days of sun all the best chaps. Kop
  6. Wayne Brown

    How do you guys relax and switch off

    Just wondering how you guys switch off and distress after a crazy week ? I am lucky enough to live by the coast so fishing from the beach is my go to place to switch off spent a few hours last night catching these gorgeous creatures they give a good fight and always makes me smile . Kop
  7. kiteboy

    Kitchen order of finishing off

    Hi all Been stuck over christmas with the kitchen install - Howdens cabinets are now all in and plumbing ready to go / waste and water in place The only thing I haven't done is put the island curved corner posts on and the side panels to the island....this is because I will have to cut those...
  8. Pritch

    Just stripped off the tiles...What next?

    Hi I've must taken the tiles off which came away quite easy and not leaving too much damage to the walls? I'm thinking next job is .. Clean off as much adhesive possible. Is there Need to patch up where the plaster came away a bit? Also do i need to pva before tiling? Many thanks
  9. acaciaguy

    Which quick setting plaster to tile off

    So I have stripped this kitchen wall back and the skim coat has come off most of the wall with the tiles. Underneath is a bonding /base coat plaster. That is sound and level. But for the lack of a skim coat the wall is in great condition. I know that you can't tile on bonding and I would normal...
  10. Andy Allen

    Guess where I'm off to tomorrow....

    Northampton.. Santa pod raceway to watch the European finals... Top fuel 300mph drag cars and bikes. Really looking forward to it..
  11. S

    Grouting going off colour

    I have grouted a floor using the BAL Smoke grey however it is not coming out that colour and is very patchy. Some bits are light grey and some are dark. It has also happened to me before. I am using a fresh clean bucket, added water and stirred with my hand with a glove on to get the right...
  12. F

    Expansion joints or skirting off

    Hi all, I've been fortunate to get a fair few 30-40m2 downstairs flooring in varying new builds (private work). So kitchen hall utility downstairs loo etc. Each time the customer wants a continuous floor I.e. no door trims. I use a multi tool to cut the bottom of the archies and slide the...
  13. F

    New Sponsor. Special 10% discount code off van storage tilt bins to forum members.

    Hi, We're delighted to be back as a sponsor of the forum. We sponsored a couple of years ago and really loved the feel (and friendliness) of the forum and members. We're going to try and be more involved this time around so we're starting with an exclusive discount code off our tilt bins range...
  14. D

    Taking 2mm slither off window tile

    Shaving a slither off a tile. All was going well with tiling my kitchen, but I've found that 2 tiles are too deep by 2mm. These tiles are on the window cill and due to a tiny lip at the base of the window it means that these tiles sit forward just enough so that the tiling edge trim will sit...
  15. T

    Tiles coming off easy and net set.

    Hi guys, I put up hardiebacker and primed with Ball APD 1:1 ratio at 2 coats. After that I applied 2 coats of Aquadefense. I started tiling (30mm×10mm) tiles, using 8mm trowel. I did a few rows, and left it to continue the following day. I Continued with the tiling but, by the next few rows I...
  16. A

    bostik primer coming off when scrapping feet on

    Have used bostik primer yesterday and it took some hours(4) to dry to walk on without anything coming off. I was going to put my self leveler on top however when i twist my feet on it firmly, some comes off. Would this be the norm or has this not bonded properly. I was of the thinking that this...
  17. C

    Very small toilet off bedroom (6' x 2') any suggestions on tiles to use

    I've got a tiny toilet off my bedroom only 2ft wide and 6 foot long. I am about to rip out all toilet and sink fittings and I'm looking to tile the walls and replace tiles on floor. Does anyone have any ideas for tiles that would suite the walls .I have saw some blue glass mosaic tiles in...
  18. Dan

    Tradesmen / Companies / Tilers that have been ripped off by Carillion

    Carillion appear to have left a lot of tradesmen empty handed. Do we have any on here? What are your thoughts on this?
  19. Chalker

    Bad tiling thrown off job!

    copied these pics from a Facebook forum I'm on. Apparently they sacked the guy doing the job !
  20. L

    Help - mother in law used shower before the grout had gone off

    I was feeling very proud that I'd managed to regrout my wet-room shower all on my own. It's my first major DIY project. I applied the grout and was waiting the seven days specified on the tub before applying grout haze remover and then sealant. However, after three days in my elderly...

Advertisement

Back