I've mapei primer g for the gypsum walls before tiling,but what do i put on the underside of the ply flooring?.I have a bottle of primer that came with the warmup kit that i won't be using as the wire will be going on top of the tanking membrane, can i use this for the ply?.
as the thread title asks: -
i have tanked the plasterboard for the shower, should i prime it again before tiling or tile straight onto the tanking?
thanks
Hi,
I have done a few tiling jobs for myself over the past few years and would rate myself as reasonably competent!:lol:
I like to ask questions before going in head-first so as to limit any avoidable mistakes.
So, first question for you hepful chaps is..... I am laying UFH in my flat (kitchen &...
Morning all!
I have had a nightmare previously with tiles and thanks to your site Im making progress again lol i have a question about the Granfix acrylic primer - the instructions for plaster priming say to mix 3:1 water to primer and apply to seal. It then says apply 2 neat coats before...
I'm about to lay Karndean tiles on an anhydrite screed which has hot water underfloor heating. The screed is thoroughly dry and has had the laitance removed. The tile supplier advised priming with Uzin 360 and then smoothing with Uzin NC110.
My questions are:- the surface is already smooth...
floorlayer
Thread
adhesive
anhydrite
anhydrite adhesive
primer
screed
usa
Hi guys, i am starting my first floor tiling project (my own bathroom and toilet) and this site has been a great help so far.
I have applied SBR bond to my plywood, but i wanted to know how long i have to wait before i can start tiling, i am using BAL rapidset flexible adhesive with 600x300...
It's me again. Quick question about priming.
Before I started tiling a wall, I decided to have a little practice run on tiling the window sill - just to get a feel for the trowel etc. (I don't get on with a trowel incidentally - an 11 incher, and wonder if I'd be better off with a smaller...
hiya peeps,just been to price a job ,old trav tiles on a concrete floor
he dosent want them takin up,nor do i:thumbsup:
would SBR bond be ok after cleaning,then tile,cheers steve
Hi there,
I am about to undertake my first DIY tiling job on my kitchen :dizzy2: and i'm looking for some advice on which primer and tile adhesive to use.
I will be laying 600x400x12mm Travertine floor tiles in a 12sqm room.
I have already layed 6mm NMP over the existing wooden floor boards...
mrcandu
Thread
adhesive
primer
tile adhesive
travertine
ufh
usa
which
For the bathroom refit i intend to take off old tiles back to plaster and tank with homelux wall & floor membrane,then if cost ok use travertine tiles 12mm thick not sure of size poss 300x450.
1.Will i need to prime the plaster before using addy to fix the wall membrane,what type of addy and...
Hi,
Just got some of Palaces Tilers Primer, from a new local tile shop.
Just wondered if any of you have used it and if so is it any good?
Also is it an acrylic based primer?
Thanks.
Vinnie.:thumbsup:
bluevin123
Thread
adhesives
find a tiler
palace
palace adhesive
primer
tiler
tilers
tilers directory
usa
If I have already primed all of the plastered walls with SBR (Everbuild from Tradetiler), is it advisable to apply Mapei Primer G on top of this prior to Mapegum, or do I just tank straight on top of the SBR?????
Thanks - Geoff
Qwerty
Thread
adhesive
grout
mapei
mapei adhesive
mapei grout
primer
sbr
tank
tanking
top
usa
waterproofing
wetroom
Hello good people of the board,
I'm looking for some advice on my first tiling job ever. I have a kitchen (concrete floor) and an attached extension (wooden floor) to tile. I need underfloor heating at least in the kitchen to take the edge off the cold in the winter, it won't be used as the...
DannyVandal
Thread
boards
floor
floor tiling
insulation
insulation boards
primer
usa
Hi guys
I've heard some conflicting info can you clear it up for me please.
If i have had to acrylic prime an area of a wall which adhesive should i use for ceramic tiles. Does it have to be a flexi?
Thanks Richie
Grout line tiling services
I was recommended this a while ago - I have googled for stockists but all it comes up with is people talking about it on here or the manufacturer's website...
I have been fighting with the vile vinyl in my bathroom all day. The adhesive it's leaving behind is just something else. It's that...
Hi all,
Just wondering what you found to be the best primer to use on floors and walls,in terms of quality and price and how far it goes.
I have just run out and need to get some more.
I have been using Webber PR370 its a PVA priming,sealing and bonding agent and 2.5kg watered down lasts me...
bluevin123
Thread
best
floor
floor tiling
floors
primer
usa
wall
walls
whats