shower tray

Hello We recently had our bathroom renovated. We have a walk-in shower, so the tiles are the same in the shower and the bathroom floor. One of the porcelain tiles (large format: 800x800x10mm) has cracked by the walk-in shower. The tile was cut (‘L’ shape cut) to fit the wet room kit. The crack...

Hi. Just thinking about shower trays. Do shower trays with an integrated upstand require sealing where tiles sit upon the tray? I wondered if this type of tray (if silicone is not required) would be better suited to a bathroom that has a history of silicone going mouldy where the tiles touch...

Hi all, This forum has been a wealth of knowledge for me while i tackled our new build. A quick question please regarding wetroom wall tiles and a glass partition. Where the wall tile meets the glass partition (tile will finish here and not go beyond the glass), do i finish the edge of the...

We paid to have a new shower room installed just over 2 years ago. They fitted a false plasterboard wall in order to make a smaller shower base fit more easily and then tiled straight over the plasterboard. Recently some of the tiles have fallen off the wall (600x300). I removed the front of the...

I have been searching for information on internal corners joints for shower. I have epoxy resin which I have used to join mitred tiles on a difficult angle external corner. Is I OK to use epoxy resin in joint on internal corners? I plan to use epoxy grout for remainder of shower. The shower has...

Hi, I recently had a contractor strip out and replace all the Mastik in my shower as it had failed. It was a very poor job and not colour matched. The new contractor did a good job, or appeared tom with a matched colour (Jasmine) but less than two months on it has completely failed, coming away...

I have just joined the forum and I'm hoping for some advice. I had a leak in my shower which now needs retiling. I have replaced the area of water damaged plasterboard with a sheet of aquapanel. The shower tray is remaining in place and I am now planning to tank/waterproof the three walls that...

What would you guys recommend to finish the internal corners on this niche? Grout or sealant? The niche is inside of a shower cubicle Already grouted the corner of the cubicle then thought maybe it should have been sealant instead. That can be corrected if need be but wanted to double before...

Hi, New to the forum. I'm going to be installing a new corner, shower unit with tiled walls, glass doors and acrylic shower pan, as part of a bathroom re-modelling project. I'm not a pro. Would appreciate expert advice on several points. The new shower will replace an old 'one piece' molded...

This is something that's been causing me a bit of a headache these past few weeks, deciding on which shower former and tanking solution to go for on a timber floor. I was pretty much sold on The Impey Linear 4 former and waterguard kit in the beginning but been looking at other options. I've...

First time renovating a shower, had a few silly questions. - is adding one layer of 2x2 on top of the flat 2x4 sufficient outer lip (on the three sides without a curb) for my pans mud beds? Shower is 5x3.5 so 2.5’ from drain at longest point. Do I really need 2x6 perimeter if I don’t plan on...

please can I ask if quartz tiles are suitable for inside a shower cubicle. Do they need any special treatment? And do I need to look out for anything in particular? Thanks

Hi, trying to find my way around this question. We had a new bathroom built, it was plasterboarded and skimmed in September. We're now ready to install the bathroom suite and tile. I understand that I should drank the area around the shower/bath before tiling. Can I apply the liquid waterproof...

Hello everyone I have a question I have installed hex polished marble san dona tile in my shower floor and 3x6 on the walls. I'm not sure what to use on the floor for grout sanded or un sanded.... I have ~1/8 joints. Thanks for the input

ive got a plastic (i think its acrylic) shower tray. Its not one of the heavy stone resin type. Anyway im going to lay it on a bed of flexible tile adhesive and wanted to check, when laying the adhesive out on the floor do you guys comb it out using the notched side of the trowel or just lay a...

I've had first fix done on a bathroom renovation, my plumber advised I tank the walls before tiling, but I'm concerned about the walls. The area behind the shower used to house a water tank and lots of the plaster is shot, surely this is not a good idea to tile on top of?! I will be removing...

Hi, So I've looked about and read a few things regarding the building regs (BS 5385-1:2018 clause 6.1.1.3). I'm just a bit unsure as to how high the tanking has to be up the walls for it to be legit? I'm looking at getting an Impey Linear 4 shower tray and I know they have their own Waterguard...

Hi, I’m tiling wall first then fitting enclosure but tanking before the tiling. My question is if I’m tiling behind the frame but only the width of the frame What will stop the water if it gets behind the tiles, running down the wall to the outside of the shower tray? Hope you can help Ben

Hi I’m fitting a Nova Frameless 1000 x 800 Sliding Door Shower Enclosure with a low profile shower tray that you lay on sand and cement. I’ve fitted Some aqua boards and where I’m fitting the enclosure the walls are slight out of plum by about 10-15mm. I’ve already primed the walls with Mapei...

Hello, I'm renovating my 2nd floor master bath. I'm about to lay down tile in three areas... on the shower floor first, then the his and her side bathroom floors, and finally the shower walls - in that order. My question is... Should i grout immediately after each tiled area's mortar it...