hi all,
So from my notes plaster can only take 20kg per m2 (including adhesive/grout).
I’m just about to tile a wet room and my issue is this:
I’ve had the room skimmed (it’s mostly a stud wall room with plasterboards, part of one wall is block). This same part block/ part stud wall had to be...
Hi.
The walls in my ensuite are coming along well...
Just thinking about the floor now.
The original tiled floor was tiled over thin sheets of plywood. The ply was on top of T&G chipboard.
Is it ok to tile on plywood? I seem to be coming across articles or posts that suggest not.
Ta. D
Hello All,
First post and hope you can help...
I'm looking to have a combination of Tiles and LVT layed in a kitchen at the same time as we do some resto work on the Gfloor of our old place to accommodate my other half's developing medical challenges, which will need level mobility friendly...
So I've decided to finally rip up my 3 year old lino in the upstairs bathroom and lay some lovely looking wood effect porcelain tiles down. I have some experience with past tiling jobs but these were on a concrete floor.
Bathroom setup
Just over 4m2 area with 25mm wood ply/chipboard flooring...
Mapei is pleased to confirm the final remaining training date for 2017 ceramic product training.
25th September – Ceramic Training Event
Mapei’s courses are free of charge and carried out by a dedicated team of training experts who have extensive knowledge and practical experience. Held in the...
Hi - I'd be grateful for advice. I'm doing a shower area due to a leak and tile failure. One of the walls is made of plasterboard which has gone rotten, so I'm in the process of ripping it out. It seems that wall is comprised of 3 layers of plasterboard (one of which I'm removing) and I can't...
ok, as thread title suggests, we'll start with walls for this thread. My own personal substrate is sand/cement render, others may like plasterboard, cement board etc..
adhesive
ceramic
ceramic tile
course
courses
format
grout
large
large format
levelling
mapei
mapei adhesive
mapei grout
porcelain
primer
screed
sealant
substrate
thread
tile adhesive
tiling
tiling course
tiling courses
training
training day
video
waterproofing
Hey guys
Was wondering if anyone could give me some advice re a floor tiling job I have coming up?
The area is approx. 20-25m2 and will be using 600x300 porcelains.
The floor is 2/3rds 20mm floorboards and 1/3 concrete as it is a kitchen and dining room that has had a dividing wall taken down...
I'm planning to use 22mm limestone on a multi layered substrate hallway; joists, ply between joists (fixed to batten), sellotex between joists, underfloor wet heating, screed over top between joists. Is ditramatt the best option with 22mm thick tiles?
hi guys, went to look at a floor today, 35m2 of chevron planks. Great I thought... Can't wait.... Oh hold on a minute..... Two different substrates! Suspended floor on one half and screed other half! The joint is staggered aswell! Spoke to builder who just wants to put 20mm thick polystyrene...
Please could somebody give me some advice.
I've been asked to quote on two jobs this week and both have split substrates.
Floor 1 is half timber and half new concrete screed with ufh. Client wants to lay 800 x 800 porcelain tile and the area is about 60m2.
Floor 2 is half old concrete screed...
Hello all,
So just been to view a job this evening......kitchen floor with 20mm solid oak flooring down which is glued......the client is insisting they don't want the oak flooring to come up & they would rather a decoupling membrane but I have recommended we get the floor up and tile to the...
Just been round to a job where the plumber has installed a shower tray and siliconed up the edges against the backerboard (Marmox type - unsure of make) - all fine, except he has smeared it into a thin layer approx. 30mm up all the way around.
Planning to tank the shower using Mapegum etc...
Hello,
I am looking for a bit of advice regarding patches of loose concrete substrate on a floor I am looking to tile. I have included some pictures to show the general state of the substrate whilst also showing particular areas of concern.
I have recently lifted the downstairs laminate...
Got a small walk in shower to rip out and re tile and was curious to know if there would be advantages to using a cement hardie type board instead of moisture resistant plaster board? I'm assuming both would require tanking, weight/type of tiles to be used currently unknown.
Millington Deco
Thread
aus
plaster board
recommend
room
shower
substrate
usa
walk in shower
Hi,
New to the site, but been lurking for a while and I'm after a bit of advice about timber floors. I'm in the process of converting my bathroom into a wetroom. It's a first floor bathroom with a timber floor, approx 3m x 1.7m with joists span the shorter distance. My house is a bit old and...
BigSid
Thread
aus
substrate
suspended
tanking
timber
usa
waterproofing
wetroom
wetroom tiling
Hi. I'm tiling the four walls in my bathroom.
It was previously tiled half way up and where I removed those, the old plaster(?) underneath was like soft pumice, so I hacked it off and re plastered, primed with SBR and tiled the lower half of the room using Mapei cement based adhesive.
The top...
Hi all
With been new to this tiling game, looking for some reading material, ref etc, finding hard to get hold of anything, have got hold of an old tile setting book by Michael Byrne, unfortunaly is American, while some of the info is the same, setting out etc, but would like ta get my hands on...
Hello all,
I seem to be in a dilemma with the tiler and tiling my bathroom. First of all, things to bear in mind are that the walls are slightly damp and I have gone for porcelain tiles. The walls have been treated with a damp proof course but I have been advised any previous damp may remain...