I'm in the process of doing a small job using Hardie backer board for the walls. I've tried to use Hardie's own brand of joint tape, but I'm finding that the tape has very little adhesion and is almost coming off the wall at the slightest touch, particularly in the corner joints.
I'm a bit...
Hi
I’m just about to renovate small bathroom and replace bath with shower. We have very hard water so trying to use simple shower screen rather than sliding door which get all scaled up very quickly. So I guess it’s almost a wet room:) with open shower enclosure but a low 40mm tray. I intend to...
Might seem like a silly question but i cant find anything in the instructions or online to suggest anything so here goes.
When applying jacko joint sealing tape with the tanking solution does the tape need to be fitted in a certain direction?
On one side of the tape, the rubber strip that...
Hi all,
I am hoping to find some help. A false wall has been constructed in my bathroom and two niches have been put into it. The 'wall' has been boarded over with aquapanel cement board and the niches have been constructed with the same. I need to tile the entire bathroom now, but taking it...
Deleted member 58878
Thread
adhesive
former
membrane
shower
shower tray
tape
wall
waterproof
wetroom
Hi all. I'm doing up a bathroom as a DIY project. Going to tile all the walls, including shower enclosure all the way up to ceiling. Is it necessary to tape all of the plasterboard joints prior to tiling? Was looking at the tape itself from Mapei and comes up around £5 per metre which seems...
I am using Marmox Multiboard on a bathroom floor adjacent to a wet room and rather than using Marmox Self-Adhesive Waterproof tape wonder if there is any reason why I shouldn’t use the Aquapanel equivalent?
It is half the price. Thank you.
Hi. Hope everyone is well.
I am after some advice after a tiler started my bathroom yesterday. I told him twice about the aquapanel joint tape and after getting home from work, I noticed he hasn't used it!!
How important is this?
My instinct is to have the tiles off and him start again
Hi all. I have 40sqm of floor to pour slc over. Half is concrete and half is 25mm plywood over new solid joists. Where they meet at the join...it is pretty near level but concrete does dip by about 8mm at one area. I am using Mapei Ultraplan as it is fibre reinforced and was also recommended to...
Greetings. I am putting in 2 showers with Durock brand cement board with Edgeguard. The instructions say to "fill joints with latex-modified mortar". I also have a Durock brand shower valve seal, where the instructional video says to use "unmodified thinset mortar" to attach it to the wall...
So here it is...... a tape measure! Hard to get excited about I know, but bare with me......
This FISCO metric only big tape is a class I tape measure, meaning it is the highest, most accurate class of tape measure around. It is in some circumstances twice as accurate as some of the tape...
It seems that every day is a school day. Marc ( @3_fall ) and a few of us were discussing tape measures today (yes we really do find these things interesting! :D).
It seems that your trusty old tape measure may not be as trusty as you thought!!!
It’s something most tilers take for granted...
Hi
I wondered if there was a heavy duty type of scrim tape/method for going over areas that have potential to move and crack tiles?
I'm going to tile on an old concrete floor that that has a crack but I have also ran my hot and cold under the floor and wondered if there was anything I could...
hey everyone today my stanley fat max broke so I need a new one.
I'm always reading 6 as 9 and vice Versa anyone use one with cm both side or something like that need something robust for site while I'm swimming my in premix
Thanks in advance
Matt
Anyone know a tape that doesn't have a little movement in the end metal tab, I always find if you hook it on and measure, it gives a different reading to if you measure from the end!
Hi, I have purchased a aquaseal waterproofing tanking kit, we have a bathtub with a shower over it. Bathtub is already installed many moons ago and not really equipped to remove it.
We have silconed between the bath (half filled) and the wall slightly below bath level. What i am unsure off is...
Crumbs
Thread
help
install
tank
tanking
tape
waterproofing
wetroom
Hi all...
When installing UFH I've always used the sticky mats but the main frustration I have is that the mats are not that sticky. I've tried using SPF adhesive to stick the mat down but found this time consuming so I've always used Duck Tape to tape down the cut edges and loose cable when...
Hi Everyone
You guys helped me out last year and I did our bathroom/level access shower which hasn't leaked so far! Went a bit OTT on the old marmox and taping etc but thought better be safe than sorry!
Anyway, had to do a shed roof repair over winter (knocked down now) so used roof flashing...
Ziggy1979
Thread
aus
clips
lash
lash clips
spacer
tank
tanking
tape
tile wedges
usa
waterproofing
wedges
wetroom
I am using Knauf Aquapanel in an ensuite shower room -the questions are:
1) what tile adhesive should I use?
2) what grout should be used?
3) what should be used to waterproof the joints between each panel ?
Thanks
lives1
Thread
adhesive
aquapanel
aus
grout
tape
tile
tile adhesive
tile grout
usa
which