tiled

I have a bit of an odd one, am doing a shop fit, client is having 100 x 100 ceramics on the bar top, bar has been constructed by 2 18mm who play sheets glued and screwed together, no apart from the obvious breakage issues, I am a bit unsure what products are best to use, was thinking of double...

Morning all, Just wanted peoples thoughts on finishing metro tiles, specifically in the corners? Even with nice cutting you still get a diamond effect in the corners that in some cases depending on the depth difference of the metro edge can look a bit off. Do you guys scribe in to minimise this...

Full bathroom refits , all trades supplied , wall and floor tiling.

Hello forum My first post here Have just started tiling a shower and the corners are proving rather tricky with nothing being square Some gaps have turned out a little smaller than I wanted and I am worried I will not be able to get enough purchase on the sealant in the corners Rather than...

Hi all, Hoping you can help. My house has a geometric tiled floor which was under carpet when we moved in. I've tried cleaning it with brick acid, but didnt dilute the acid enough or didnt clean up with enough alkaline. Now the tiles make a crunch sound in a few places when I walk on it. I...

Hi, So I’ve recently bought a new house and I’ve got some problems with the tiling on the ground floor. I’ve got some 600 x 600 porcelanosa tiles laid and it’s been grouted with a light grey grout on a concrete slab floor. I’ve got some patches of grout that look like someone has poured water...

Hello, We've got a small bistro table which sits outside all year round. It's seen two winters (if you can call what we've just had a winter). The tiles are looking abit flat and I would like some advice on what would be best to brighten up their appearance. There is no damage to the tiles nor...

I'm pouring a reinforced concrete slab pathway to my front door which i want to tile with victorian mosaic tiles. the path will be 10m x 1m. i've been told to cut expansion/control joints every 2.5 metres. if i do that, do i fill these joints with screed and tile over them? any advice

Hi fellas,im looking for some advice please. I'm a reasonably competent diy'er completed numerous tiling projects over the years, last one was my main bathroom stripped back to stud and used wedi board and tape etc. Currently doing en suite and I've decided to go down the tanking route, showers...

Hello, In the process of re-doing my bathroom and quite fancy a marble sink. Sadly I can't find one that is the right size and/or that I can actually afford to buy so had the (quite possibly bad) idea to DIY one using the same marble tile (12mm) that the walls and floors will be tiled in. My...

A new one for me, and i have been dreading it. Tilling a bathroom worktop, To be precise three bathroom worktops all with mosaics. I have never been asked to do this before, I'm guessing it can't be too difficult (I hope :) ), my plan is to fit 18mm ply and then hardi over the top. Then...

Can include the area of the property (for example - the dungeon), the property itself (bathroom at Buckingham palace) or the country you were in (tiling an igloo at the south pole). I have no out of the ordinary places, but lets see what you lot have been up too.

Evening folks.... I have a slight issue I could do with another opinion on. I priced a job a few weeks back to install travertine over a timber floor. Included in the price was the supply and fitting of a decoupling membrane and the removal of the existing floor coverings (carpet and...

Hi, I have just finished ceramic tiling bathroom, walls & built in bath with power shower over. The tiles were adhered straight on to Wickes Tile Panels which are fixed to timber battens which in turn are fixed to the brick walls. What will the best grout be to use? I have looked at Epoxy...

Good Afternoon Everyone - long time no post. I have a job to do, tiling onto an existing tile floor in a shop basement. The tiles at the moment on the floor are straight onto a concrete screed and very stable. They are sized about 200 x 500 porcelain with a mid sheen finish. The inevitable...

Hi. I want to make a removable tiled countertop to sit on a T&G panelled half height concealed cistern. My tile is 9.5mm and I assume I will need a minimum of 15mm ply so with the adhesive I will have a depth of approx 27mm. I've trawled the Internet but can't seem to find a suitable chrome...

We had a wet room installed about 8 months ago. The floor is tiled with large 60x60cm porcelain tiles laid on Impey Waterguard membrane and the shower tray is Impey Aquadec Easyfit with the membrane laid over the top. It is a new-build first floor bathroom (new extension on older house) with a...

Hi. I need a bit of advice about a 95m2 patio I'm due to do in 1200x600 porcelain tiles. The issue is with the substrate. It has drainage channels all around the walls which to me isn't needed as the substrate falls away from the house and only needed channels at the bottom end. Long story...

Just curious to know why this post was deleted?

Hello all, i have just had a new bathroom installed. The tiler has tiled the side and the foot of the bath however, the frame or the tiles at the foot of the bath are not flush with the bath overhang trim. They is about 1/4 inch lip between the tiles and the over hang if the bath and at the side...