went to have look at nice big job yesterday, standard story, couple just got the first builder they could in, hitting the final stages and now the problems and cost is going up, but the new extention is all alpha hemi hydrate screed with wet ufh so now real issues there hopefully, its the...
Hi.I'm a new member here and would appreciatte some advice on my case.
I'm about to start kitchen floor project in a few weeks. Area to be tiled is approx 20m2. At the moment there is 2mm thick karndean tiles layed bonded extremely well to wooden boards with some insullation underneath the...
I have just found your forum and wondered if any of your experts could help with my question please?
We have had wet UFH overlay boards installed in a hallway (9m long by 1m wide) with the wet UFH pipes. This is connected to a large kitchen area UFH on top of Celotex boards (which will have...
Hi all :)
Installing an Impey wetroom former/tray & tanking kit. The floor will be tanked, then electric UFH, then mosaics... but before that, the existing subfloor is P5 grade chipboard which is in good condition. I assume I'll need something over the top of that before tanking, i.e. thin...
Ben R
Thread
canada
chipboard
electric
heating
mosaic
mosaic tiling
mosaics
over
ufh
underfloor
I wished to share this work with you, if I can.
Lombard terracotta, material made by hand in my area.
20x40 size of 30 sqm cellar.
format 20x40 with rounded edge, for 2 stairs, 30 stairway steps total.
There are also three bathrooms and a terrace.
1 floor bathroom, must be laid on the product of...
Italy
Thread
canada
floor
floor tiling
terracotta
the tile association
tta
ufh
Hi there,
We are having water underfloor heating installed into our kitchen which is on suspended wooden floors.
The system is going to installed in between the joists and insulated (below) with 100mm rockwool panels.
On top of the joists will be structural chipboard flooring.
As there will be...
Justintime4t
Thread
best
floor
floor tiling
subfloor
tile
tiles
ufh
wooden
Hi,
I was just wondering if anyone knew roughly the cost of running electric underfloor heating? I am aware that different systems will be slightly different but just a general estimate from peoples experience.
I am asking as was building an extension in our house and weighing up the cost of...
Hi All,
Need an advice with regards to underfloor heating and which brand to go for...
Need about 7m2 200w for my conservatory, 6m2 150w for kitchen and around 2m2 150w for bathroom.
There is so many brands to choose from Warmup, ProWarm, WarmStar, Underfloor Heating Co and I'm bit lost as...
Alzak
Thread
electric
floor
floor tiling
heating
ufh
underfloor
underfloor heating
Hello all,
We had a wet self levelling screed floor pumped into our kitchen back in October. UF Heating has been running well since. Just ordered 900x600 limestone tiles and need advice on prep before laying them. We have been told various things, conflicting too. Do I need to seal/prime the...
ok so im on a job with 3 bathrooms to go at. Ive got 2 of them prepped with deltaboard 6mm,ufh,self level and waterproof. i came to start the floor in the main bathroom saturday and the tiles for it had been delivered. i cracked on and got the majority of the floor down before the customer...
Hi everyone,
We've an existing kitchen floor on Block & Beam + starting an adjoining extension with wooden joists. (has to be due to slope)
We are wanting 'Wet UFH' across both surfaces finished off with tiles but only have a maximum height on top of block & beam of 80mm (including tiles), is...
Ay up chaps
Just re-doing one of bathrooms in my own house and just wanted to pick your brains for a moment.
I've ripped all old floor boards up and installed 25mm plywood screwed every 100mm with 70mm screws....solid...
I plan on installing EUFH in the room and the wet area and plan on doing...
Hi guys, the job, 140m2 of Mapei renovation screed over profix 15mm ufh system. It was to big for me to lay by hand so got a firm in to pump it. They have done a top job getting spot on flat but after inspecting it 2 and half days after it was laid I found pretty much every where it had the...
goz
Thread
canada
compound
levelling
mapei
mixing
over
self
self leveling compound
self levelling
system
ufh
wet
wet ufh
Hi all
First post on here as need some advice. We are building a house and have got to the point where the floors need tiling.
The floor is a sand and cement screed that was NOT poured. It has been in the house since August.
The screed contains water based UFH which has not yet been turned on...
After a long search on the internet I managed to source some really well made loose wire underfloor heating wire clips. These are in fact galvanised steel banding with clips built in. I had to import a whole load for a few ufh projects I have and they have been an absolute God send! I also...
Hi Guys, never used underfloor heating before but I'm doing one this week. Only 3 metre square, loose wire Prowarm on old but good condition floorboards.
The data sheet says no mention as such of Hardiebacker, we have some 6mm insulation boards on site already.
Is it Hardiebacker as normal...
How long do you think it will take to dry out this screed? Been down 90 days, 50mm thick so should have been dry at 60 days! Plastering has been going on so can't have helped? This is what the tramex read a few days ago. Got dehumidifier in and getting customer to get the pipe temp up to 50...
Hi Everyone,
It was a long time I posted here, but always found good advice all the time.
I need some help on a bathroom where UFH going down.
The substrate at the moment is 22mm chipboard. In their specs they want to go over the chipboard with 6mm WEDI screwed, then electric UFH, I would go...