wedi

  1. C

    Wediboard or similar.

    Any experience with Wedi Board or similar. 6mm Wedi 1250 x 600 - best price to date seems to be around £14.50 inc VAT. Adhesive £17 ish. Add fixing disks, add tape and etc., customer takes a deep breath. Add tiles and price is questioned. Any advice. What is your preferred backing board for wet...
  2. 1

    Installing wedi board to masonry brick wall

    hi, I have got one side of my shower that is a masonry brick wall (looker plaster removed) that I’ve got a couple of queries on regarding the fixing of wedi board (or similar) 1. Will using tile adhesive to fix the wediboard be ok? Does the wall need priming first? The wall on the whole is...
  3. 1

    6mm insulation board fixing (wedi)

    hi all, I need to fix my 6mm wedi over my ply subfloor ahead of installing UFH and tiles. As well as mechanically fixing the boards with screws / wedi washers do I need to use tile adhesive or can I use the wedi adhesive / sealant? I spoke to wedi who said their sealant can be used as an...
  4. C

    Wedi - Sealant over washers

    Hi folks, So bought my first house a year ago and have recently ripped out the shower room to start again. I've opted to go for Wedi which is already up on the walls and have also built a 100mm concealing wall now boarded with Wedi utilising their rather expensive washers. I'm now at the...
  5. 1

    Wedi vs Hardie for shower tanking

    hi all, After abit if advice re boards for shower and tanking.... My 1200x800 shower has two existing walls within it, one of plasterboard stud wall and the other plastered masonry. I was thinking of removing the plasterboard within the shower area and replacing with either wedi or Hardie...
  6. W

    Trying this stuff out today to bond some Wedi onto a window reveal.

    Not to be confused with filler foam. This is a foam adhesive. Fast setting and sticks more than it expands although does expand a bit apparently.
  7. Y

    Retiling wetroom advice on how best to proceed

    Hi all, My wetroom is going to be refurbished after my impey tray failed after 10 years. Wetroom is 2m x 3m. Existing Wetroom: I have decided to remove the whole floor, but leave the walls where the sink and radiator is. However, the bottom row of tiles from these 2 walls will be...
  8. I

    wedi shower floor.............

    question. In my last job I found this wedi shower floor. first time i see wedi, i've done a couple of schluter before but it was also on the walls. here, the walls are sand and cement and I have to impermealize. how should I behave with the connection between walls and floor panel? just a band...
  9. T

    Washers or Just Screws?

    Hey, all Just wondering if you need washers for installing 6mm boards like Norcros pro board, Wedi, Mamrox, Kerdi etc (not hardiebacker) Onto a solid wall? How would you install 6mm backer board to a solid wall? I Just don't want to order washers for nothing.
  10. C

    No More Ply and Wedi Alternatives

    Hey all, So I'm about to start working on a wetroom project on my first floor (and am not interested in UFH). Naturally, this is currently timber floorboards - which are in good nick, however, in a previous thread, someone posted that I should remove these and place 22mm NMP down directly onto...
  11. O

    Topps to start selling Wedi

    I’ve just seen something that says that Topps are now selling Wedi. True or false?..............
  12. Y

    Wedi vs Delta Boards

    Hi All, Pleases can you advise which is the superior product Wedi or delta? Is it a matter of personal preference, or are there certain characteristics of one that is better then the other?
  13. L

    Swedish wet underfloor heat....

    Swedish grabbed your eye didn't it! Has anybody ever used the Swedish made NK kit? LK Manifold RF - LK Intermational - http://www.lkinternational.co.uk/en/products/floor-heating/manifolds-with-accessoiries/manifolds-rf/lk-manifold-rf_22346481.aspx It looks like NK make all their kit and its not...
  14. G

    Painting Marmox or Wedi board

    Hello, I am new here, need some help please. I am tanking a small bathroom with Marmox multiboard or Wedi board (probably Marmox it is cheaper). However there is a sloped ceiling which will partially be in the shower cubicle and get wet, it intrudes into the room quite far down to 150cm from...
  15. A

    Wedi/Marmox on hardwall - dowels plus dot and dab or dowels plus full addy bed?

    Just about to line my en-suite out with Marmox boards onto the existing (new build) hardwall finish. Primed with Mapei G first and will use spankers/dowels but what's the consensus on dot n dab vs full bed of addy? Will end up with 300 x 600 9mm porcs on top, but the spankers are there to...
  16. S

    What do you use to mark wedi board

    Pencils are too dark .Just curious to know
  17. A

    Suitable Adhesive for Wedi board onto Hardwall?

    About to fit out a wetroom with Wedi board, it has very well cured Hardwall (12 months) on the walls which are flat and keyed. What's the best adhesive to bond Wedi board to it? (Boards will also get mechanical fixings but I'm worried about Cement based adhesives onto to Gypsum Hardwall....
  18. A

    Which non cement based adhesive for bonding Wedi board to hardwall

    Long time lurker first time poster I'm currently planning a wet room in an extension which was built a year ago. 3 of the 4 walls are thermalite with Hardwall but no finish plaster. The hard wall is very flat and keyed as my builder knew I planned to board out the room (it's also very dry as...
  19. M

    Wedi Installers Course

    Hi Peeps I finally got around to doing the two day Wedi installers course last week. Very interesting and well worth doing. They do two courses a month. Sharon
  20. S

    New to Wedi / Jacko, advice needed on uploaded pic please

    New to using Jackoboard and may have potentially dropped a bollock so wanted to check first. The picture is an internal corner where a 800x800 shower enclosure is going. I have joined the boards with boardfix / wedi 610 and pulled the washers down just below the surface so they have dished...

Advertisement

Birthdays

Top