wedi

  1. P

    Wedi Tilebacker Board Query

    Hi, I am looking to install a Wedi Fundo shower tray by cutting out the chipboard and then securing 6mm ply on the joists (I will strengthen by adding more joists) followed by the tray. By fitting the tray on the joists + ply I don't have such an issue with levelling the rest of the bathroom...
  2. R

    Floor construction - Ply, hardi or Wedi

    Hi All, I am looking to tile my bathroom floor and have been looking at a couple of options for a sound base before tiling: 1 - 18mm ply screwed to the joists; 2 - Hardibacker screwed tot he joists (thickness?) 3 - Wedi board We are looking to install underfloor heating as well. Which is the...
  3. J

    Wedi joints

    Hello everybody, hope you're all in the pub by now, wish I was!! Seem to be posting a question for every job I do at the moment!! Anyway query is, currently prepping to tile 400 square trav onto wedi. Taping up the joints at the mo and using the self adhesive waterproof membrane. Now I just went...
  4. A

    Wedi Board info

    heres some info on Wedi board. theres a web link and technical helpline number too :thumbsup: WEDI BOARD Call Technical Services on 01706 647 333 W www.wedi.co.uk . German pioneered ‘tile backer board’ developed in Northern Germany by Helmet Wedi in 1983. . Water proof...
  5. S

    Wedi Roadshow

    Just wondered if anyone had heard about the Wedi roadshow? Wedi have bought a trailer that opens up into a training room/demo area that they are taking round the country
  6. C

    Cheap Wedi Fundo VBK Round Shower Cubical - cylinder walk in type!

    My local supplier held a Wedi morning yesterday and mentioned to me that he had one of these in stock as a result of a cancelled order. He just wants rid of it. Wedi Fundo Round Installation 2 He's looking to do a sizable discount to clear it out, taking a low margin in the process. He's...
  7. U

    Wediboard to a fence...

    How would you do this? Got a likely commission I am thinking about in advance.... The brief: to cover three wooden fence panels (6'high x5'wide) with part mosaic, part stainless steel, the steel not part of my job, but the mosaic will have to fit pretty flush against whatever shape stainless...
  8. P

    Sealant for Wedi board

    Hi all, First post, but have really appreciated learning from this forum over last few months. Thank You. Chance now to post. Nearly finished a project tiling down to a domestic bath. with shower mixer taps, using wedi board, wedi waterproof tape, BAL Sgle Part Flex cementious adhesive (for...
  9. kilty55

    wedi thickness

    hi all,what thickness of wedi would you reccomend to fix mosaics to in a steam rooom walls block walls so going to dot and ab the wei and also scrw it to straighten the alls as well is 10mm sufficient or should i go for 20mm wedi ta in advance there is a curved stud ceiling so will i need...
  10. C

    Wedi on a brick wall

    Hi gang, so I'm working on a bathroom and behind the tiles was a morass. One wall is the outside wall of brick previously plasterboard dot and dabbed, the other plasterboard on stud and failed under tile removal. Want to Wedi board the enclosure 80x80 but can I dot and dab Wedi to brick or do I...
  11. M

    Belt and braces for Wedi board

    I am looking to fit a wedi tray with wedi backer board and am concerned with the jointing method. Wedi website advises butt sealing the boards and using their tape, bonded with a cement based flexible adhesive. The tape provided does not look waterproof and a cement based adhesive certainly wont...
  12. M

    Wedi fundo

    I am looking to put in two wet shower areas and my plumber has said Wedi are good. looking at buying the the 1400x900 trays and using wedi backer board for walls. I have looked at the wedi kit and see that only water proof tape and cement base flexible adhesive is advised to seal joints etc. I...
  13. kilty55

    kerdi/marmox/wedi

    hi peeps,i have to create a 3 peiced bath panel for 3 sides of a steam cabin..all are to be removable and i also need curves for going round to suit the sahpe of it,,do kerdi boards and marmox boards do such a thing as a board you can shape to suit? i have only used the straight wedi boards...
  14. K

    Advise on fixing wedi to MR chipboard???

    Help please. I have joined this forum for advise on installing a wedi fundo tray onto moisture resistant chipboard flooring. Adhesive suppliers have told me that there is no adhesive we can use to stick the tray down and we will have to overlay with ply or remove the flooring!! For obvious...
  15. P

    WEDI made in workshop

    It is way to make product as WEDI board. You have to get this - BASF Group: Plastics - Styrodur: Styrodur® 2500 C and then put something like this broken link removed , inserting into the first coat Fiberglass mesh. It should work.
  16. S

    Wedi board prices

    Anyone got any ideas on the best place to get Wedi board from?
  17. T

    Wedi Sanbath & Basin

    Hi Has anyone done a sanbath or basin as I have a customer who's interested in one. Just had a look online and can't see a supplier. Will give CTD a call tomorrow and see if they can get it. Any advice would be really appreciated. Tib
  18. B

    Aquapanel? Wedi? Other?

    Hi, just after a little advice from those more experienced than myself (that'll be most of you then?!) I looked at a job today; a shower room to refurb. Looks as though a pretty tidy tiling job was done about four years ago but two walls of the shower are ply on stud and it seems like no tanking...
  19. N

    Wedi vs Marmox vs Dukka plus Avondale Limestone

    Hi As previously discussed in this thread I am going ahead with a stone floor to replace my previous oak one that has been scrapped following a flood. (boo hoo - I prefer wood) OK nothing ideal about this situation I know, but we cannot go through all the disruption again so want to get things...
  20. T

    f ball stycobond f44 instead of spf for wedi ?

    used stycobond f44 acrilic emulsion adhesive this weekend on a small cloakroom floor to bond the dural ci matting ( thanks for the info gary the tiler). this was over chipboard flooring and worked out well. now tommorrow i have 10 m2 of 6mm marmox to lay over t and g flooring in a wet room...

Advertisement

Birthdays

Top