which

  1. H

    Which Tile Hole Cutter?

    I'm about to start my bathroom walls and will have to cut the usual holes for rad pipes, shower, and waste and maybe for some fixings. What do you guys recommend is there a kit with all the cutters I need? I know they are not cheap, but I dont want to spend a fortune on them. but at the same...
  2. W

    Which shower tray/enclosure?

    on from my previous post about tiling over plasterboard, ( thanx for the replies ), and believe or or not, I've started to remove the old tiles and the plaster board is still there, but early days. I'll be installing a new shower tray and enclosure, completely different to what's currently...
  3. M

    Which Sigma cutter?

    Question for all the sigma users, if you were to buy 3 Sigma cutters which sizes/models would you recommend?
  4. Dan

    Which waterproof tanking system do you use?

    Which waterproof tanking system do you use to tank your showers / bathrooms / wetrooms? If your product isn't on the list let me know and I'll add it. I've pulled up the names from an old thread. So they might have changed now. If they have, let me know and I'll change them on the poll.
  5. Andy Allen

    Which Grout For Porcelain Wall Tiles With 2mm (small) Grout Joint?

    What grout would you use on a 600x300 porcelain tile thats going on a wall with 2mm joints...
  6. S

    Which Grout For Wall & Floor Porcelin Tiles (4mm Gap)

    Hi All, Nearly finished my bathroom tiling. I have installed large porcelain tiles on wall and floor with 4mm gap using kerraflex. I am looking for either a grey or black grout (need to run it past the missus!) what do you reccomend? Shall i stick with Mapei products? If so Kerrcolour or...
  7. L

    Help Restoring Terra-cotta Tiles Which Have Been Under Carpet For Years

    Having trawled through the internet i have stumbled across this forum and was wondering if anyone could help the dilemma we are currently facing. We have recently purchased an old victorian terrace which is in dire needs of repair and restoration. When we took up the carpet and lino in the...
  8. D

    Which Adhesive

    I am tiling a bathroom with 30cm x 10cm tiles. Which brand adhesive is best to use? Powder or ready mixed? I presume 6mm trowel?
  9. B

    Which Plywood substrate?

    Afternoon all, In the process of bathroom refit I have had to remove all of the old chipboard floor covering. I am now ready to put down a replacement before laying Ditra Heat and then tiling. What is the opinion regarding ply thickness? Would you suggest 18mm plus a 6mm backerboard or a...
  10. S

    Help to settle an argument - which first

    Hi, the arguments about tiling the floor before the walls, when using the same tile and your lining the joints up ? The floors about 5sqm, walls 25sqm 60x30cm porcelain. I would normally always lay the floor first in this scenario, as you guarantee matching the joints on both wall and floor. I...
  11. widler

    Which one ?

    I recently did another limestone floor in a house I laid a limestone floor in around 10 years ago. The 1st floor was in the dining room/kitchen, the new one (I also did the hallway in hexagon limestone ,at the same time) is around 3" lower. They have a disabled son so they wanted a ramp not a...
  12. D

    Garage floor which addy and grout?

    I've been lurking for a while now so thought it best to say hi and ask a couple of questions. I'm just finishing off my 7m x3.4m self build garage / extension and am planning to tile the garage floor with a non slip porcelain tile. I was going to use something like mapei keraflex ( as I'm not...
  13. B

    Which Bridge/Table Saw

    I'm working on a job at the moment and the tiles are porcelain 640mm. They'll be a number of cut edges that won't be trimmed/beaded so needs to be a perfect finish. I don't really do enough tiling to warrant spending a fortune and wondered if anyone could recommend a suitable saw/blade combo...
  14. L

    Knauf Aquapanel - which tile adhesive/grout/jointing tape?

    I am using Knauf Aquapanel in an ensuite shower room -the questions are: 1) what tile adhesive should I use? 2) what grout should be used? 3) what should be used to waterproof the joints between each panel ? Thanks
  15. D

    which wet cutter for stone work

    Hi folks, I am looking for advice on which wet cutter I should get for cutting 14mm trav/slate/marble? I have recently completed a C&G tiling course and have most tools I need but am stalling on buying the wet cutter until I am sure I can get one that will do the job well. Budget at the moment...
  16. B

    Cutting metro tiles and which bathroom grout.

    Hello, this is my first post on here. Just a couple of questions, Firstly I'm tiling my bathroom with 100x200mm metro tiles. I've used the same tile in my kitchen, now my question is what's the best way to straight cut them. I used a cheap plasplug wet tile cutter and I hated it, absolutely...
  17. D

    which one??? aaarghhh

    thought I'd keep Ruby's thread separate http://www.tilersforums.com/32-general-chat/51829-only-went-holiday-came-back.html but getting a new pup, same breed but a full pedigree this time. I've got the pick of the 4 boys that are in the litter and although I've yet to see them in the flesh, I...
  18. A

    Hardiebacker Board - Which Adhesive

    Evening all, Ive just ordered hardiebacker board to install in bathroom. Wall - Will be installed directly onto existing masonry Floor - Will be installed on to 18mm WBP, with a further sub floor of 18mm WBP beneath. I have read conflicting information with regards to which adhesive is best...
  19. N

    Which printing service for business cards?

    Hi there, I know, there are similar threads about business cards in the forum, but they all are a bit to old... So please help me out: My boss wants some new business cards and "asked" me, if I could search the internet for an appropriate printing service. But there are so many, and I have no...
  20. jobdone

    Which grout?

    About to start a kitchen floor. 20mm thick limestone chiseled edge. What grouts would you all recommend. I would normally use Ardex FL but it only goes up to 20mm and the depth will be greater than this coupled with the varying widths will it be good enough. Have looked at the C2 but not many...

Advertisement

Top