which

  1. K

    Which Mapei Flexible Grout best matches Colorstuk Rapid n Gris ?

    Hi, Not sure whether to go for Grey or Ash Grey to best match to Colorstuk Rapid n Gris/Grey. Any suggestions ? thanks
  2. O

    Which is the 'whitest' white floor grout?

    The question is as above........ I have a customer who is determined to have white floor grout White floor grouts that I have used in the past(long time ago)have tended not to be the white........no names. Any recommendations for the whitest available, and a grout sealer while we're on about it! TIA
  3. W

    SLC over Ply before NMP? which SLC?

    Hi there, My first post! I've been following the forum a while at a distance! a great resource Im renovating my bathroom (2mx2m floor) and I've got a question about SLC. The entire first floor of the house isn't level, it dips into the middle of the house and in the bathroom this means there...
  4. S

    22mm ply onto joists, ufh, which board to use and why?

    Hi all, been browsing through the forum trying to find a definitive answer. I'm in the process of qouting for a 33m2 floor. The floor is not ready yet, but it will be 22mm wbp plywood primed on all surface and then down directly on to the joists, noggins will be added and bricks built up under...
  5. A

    Which cutter for 9mm riven porcelain 300x600 tiles

    So, I have 35m2 of bathroom to tile in 300x600x9mm porcelain. They're rough textured riven effect. Recommendations on cutters please wet or dry. Will probably buy and resell later as I've another bathroom and a kitchen to do at some point, so happy to get something decent. Already have a...
  6. A

    Which non cement based adhesive for bonding Wedi board to hardwall

    Long time lurker first time poster I'm currently planning a wet room in an extension which was built a year ago. 3 of the 4 walls are thermalite with Hardwall but no finish plaster. The hard wall is very flat and keyed as my builder knew I planned to board out the room (it's also very dry as...
  7. D

    Looking to invest in a decent tile cutter.

    Morning all, I'm in the process of starting out and looking to investing in a decent tile cutter and wet cutter. Anyway have any recommendations on good brands/models or brands to avoid? My budget is fairly flexable. I would rather spend the money now, than have to buy an upgrade in a...
  8. L

    Any advice please on tiling onto ply which is screwed to decking ?

    ive been asked today can I tile over decking in a garden which will be ply boarded first ? Very odd I thought but if anyone has any advice etc it would be very much appreciated . Cheers
  9. Archie69

    Which silicon do you guys use for showers

    hi there once again, just a quick one, I've used all different brands of silicon, but recently used Mapesil AC. After six months got a call back to say silicon is coming away, when I applied it both bath and porcilane where clean and dry. What are your thoughts on this, I've recently picked...
  10. Dan

    Which Tile Adhesive is Recommended for Thin Porcelain Tiles?

    Which tile adhesive makes are recommended for thin porcelain tiles? And are tile adhesive manufacturers making adhesives specifically for thin porcelain tiles these days? What was the last adhesive make you used with huge porcelain tiles? Did the adhesive company verify the specification or...
  11. L

    Which SLC & which order.

    Hi all I'm after some advice. Planning to lay some Heatmat on top of Marmox 6mm boards in my Concrete kitchen floor then tile on top. The floor has quite a substantial dip/slope probably about 10-15mm where I have removed an old larder cupboard. I have some Uzin 152 SLC but it concerns me...
  12. P

    Which trowel to use for Schluter Ditra?

    Hi. I'm laying large format porcelain tiles over screen with wet underfloor heating. I'm using Ditra as an uncoupling membrane, with Schulter movement joints at door thresholds. As the title of this thread suggests, I'm not sure which size trowel I should be using under the Ditra. The...
  13. Dan

    Best Tile Adhesive for Walls - 2016 Tile Adhesives Poll

    Our annual poll has been requested and is quite late in comparison to when we usually run it. Best Tile Adhesive for Walls - 2016 Tile Adhesives Poll But here it is, better late than never. Which tile adhesive did you use the most during 2016? You can see our old polls here:- ALL TILE...
  14. 1

    Progressive hole in porcelain tiles

    Hi all I am about to start laying some 600x300x10 tiles, the first 2 of which will have 15mm pipes going through them for the towel rad. The issue i have is that i am using speedfit connections which i have managed to get mostly into the wall, but have a slight protrusion where the chamfered...
  15. W

    Which Tile nippers? (ceramic/mosaic)

    I had bought these faithfull tile nippers, which looked good in pic but were utter crap ( even they weren't the cheapest stuff on market and they aren't Faithfull at all!), Didn't realized that I can't even cut a regular tile with them only some very thin stuff and the cutting metal already...
  16. H

    Tiling over a concrete floor which has already had a coat of PVA

    Hi I have had specialists in to remove vinyl floor tiles containing asbestos leaving behind the bitumen adhesive (also containing asbestos) which they have encapsulated by giving a coat of PVA. What is the best way to go about tiling the floor? Its a concrete floor mostly covered in bitumen...
  17. B

    Which tile cutter do I need?

    Happy New Year Everyone. A newbie who has recently got into tiling but finding the manual cutters and wet cutters a headache with regards what to go for? Don't want to waste money buying the cheap stuff and regretting it but at the same time don't want to waste money on the more expensive gear...
  18. W

    Which of these Baths Is better?

    I'm after a small bath , at first I was overwhelmed with the choice of different models from different websites, but than I realised that they are all selling the same models just under different names/made-up brands :D the SKU's/product pictures however are the same. I think I have narrowed...
  19. C

    Which electric wet saw?

    Hi guys. I'm starting with tiling as I realized I enjoy it a lot :) . Please I need help with choosing the right wet saw mostly for cutting the tiles edges to 45 degrees ( jolly edges). What saw would you recommend according your experience? What is better: portable saw or table saw? Diffrence...
  20. B

    Which direction to lay plank effect tiles

    Hi all Jst wondering if anyone could help me with my decision of which way to lay my plank tiles on job next week ! I started job on Thursday by removing old existing tiles off a concrete floor and before removing noticed a high point in floor ,, one row of tiles the full width of room ,, so...

Advertisement

Top