800+m2 of SLC

[cam_low]

I am looking to purchase enough SLC to cover this I normally use Renovation screed, however will be open to suggestions. Going straight over concrete after a hoover and a prime.

The next question I have is what is the quickest way to hoover this area and also prime it.

Thanks folks

Cam

 

[thickbed]

Have you seen the itools range can mix I think 4 bags at a time all done internally,once mixed,tip your bucket and put the next mix on. As for priming I would apply it with a garden pressure sprayer depending on how thick it is

 

[lizzardtong]

you can get something simillat to that http://m.youtube.com/watch?v=gnz9tMGZVEY or make it yourself.
how deep have you go with slc? based on webber floor.set it takes 1.7kg per 1mm per 1 m2. so 17kg to do 10mm on 1 m2

 

[CJ]

Unless you have the man power, I would seriously think about subbing it out to a company who has the equipment.

 

[cam_low]

thanks for the advice lads .

I should have said at the start that the floor merely needs to be smoothed off to take gym mats. me, two lads and a skid rake will be fine.

 

[radim]

hoover ( Henry would handle, he is sucker), wide painters roller. 2 paddles, buckets and few guys for help. job done

 

[cam_low]

 

[cam_low]

[MENTION=18399]thickbed[/MENTION] who supplies the itools in the uk ?

 

[cam_low]

[MENTION=18399]thickbed[/MENTION] who supplies the itools in the uk ?

 

[widler]

Why not ring mark up at tilemaster ,direct in Lancashire, I'm sure he will give you a good deal , he is a top bloke

 

[cam_low]

well ive just heard that someone else has sorted the materials. grrrrr time wasting !

 

[thickbed]

@thickbed who supplies the itools in the uk ?

trade discount shop-google it

 

[cam_low]

not any more it would appear !

 

[Rookery]

thanks for the advice lads .

I should have said at the start that the floor merely needs to be smoothed off to take gym mats. me, two lads and a skid rake will be fine.

Would I be right in thinking SLC's don't give a wearing surface?

 

[peteablard]

Would I be right in thinking SLC's don't give a wearing surface?

Some do, I've used F Balls Stopgap 800 a few times in areas that needed levelling but no floor covering fitted after. Still needs to be sealed after to prevent stains and spills penetrating