Angle finders

[Gazzer]

Care to elaborate mucka??

Ermmm its a lot simplier but still suffers with the grout line width dependent on the width of the metal on the rubi. I found that it was making the cut too large , so I glued a small strip of aluminium to the frame which gave me a perfect size and included a 1mm gap to the wall...does that make sense ? Its easy when you see it working. The Rubi only does one angle at a time though.

 

[Mouldy]

T5 is the same in that respect, one angle at a time. As for the strip idea, yup, makes perfect sense! To be honest I was going to get the Rubi but was talked out of it by the guy on the phone!

 

[Scott]

Looks a good idea Dave but by the time I had done all that I could have cut the tile twice.

If you used one Dom you might only have to cut it the once.....rrr:rrr: