S
SCEZY1
Hi all, currently have a Self build in progress and require some advice, after reading a few posts and doing a little research I have come to the conclusion that my two upstairs bathrooms set on 600 centres posi joist and 22mm caberdek should have been 400 centres and a totally different floor finish. Like WPB
Am I correct in thinking this?
1, I’m hoping to lay two large linear formers 1500x900 was looking at the tough x Maybe someone could recommend a better one, do they all perform as good as each other and ease of tiling?
2, Our posi joist top chords are 47mm deep, should I fully fill that with ply to support the former?
3, What’s the Best material to lay over caberdek and what’s the best way to reduce any floor deflection and best materials for tiling on?
4, Our plasterer has said to plasterboard and skim both bathrooms and tile onto that, as that’s what he does on every job. Would we be better off using a backer board and tanking kits where needed? What would a tiler prefer to work on to give the best results?
Thanks Scezy
Am I correct in thinking this?
1, I’m hoping to lay two large linear formers 1500x900 was looking at the tough x Maybe someone could recommend a better one, do they all perform as good as each other and ease of tiling?
2, Our posi joist top chords are 47mm deep, should I fully fill that with ply to support the former?
3, What’s the Best material to lay over caberdek and what’s the best way to reduce any floor deflection and best materials for tiling on?
4, Our plasterer has said to plasterboard and skim both bathrooms and tile onto that, as that’s what he does on every job. Would we be better off using a backer board and tanking kits where needed? What would a tiler prefer to work on to give the best results?
Thanks Scezy
