Can anyone give a Laser level recommendation

[Blunt Tool]

If you need someone, there’s a guy Manchester way I’ve used and he’s excellent.
Quoted me £30 to recalibrate and it turned out it was a little more complicated.
Told me that it should of cost £80 but he’d quoted £30 and that’s all he wanted.
We argued and settled on £50.
Out and back to me inside 4 days.

Was yours out of calibration?

 

[Old Mod]

Was yours out of calibration?

Yes Ian, but only on floor cross hairs, but I haven’t needed that function nearly all year, it’s all been wall fixing and it was perfectly ok.
On floors however one of the beams drifted by about a mm a metreish.
Didn’t get it sorted til I needed it.
It needed to be dismantled, hence the extra cost.
It’s perfect again now and its kept in a box which is just a little bigger than the laser and is lined with protection. 😀

 

[Blunt Tool]

Yes Ian, but only on floor cross hairs, but I haven’t needed that function nearly all year, it’s all been wall fixing and it was perfectly ok.
On floors however one of the beams drifted by about a mm a metreish.
Didn’t get it sorted til I needed it.
It needed to be dismantled, hence the extra cost.
It’s perfect again now and its kept in a box which is just a little bigger than the laser and is lined with protection. 😀

I’ve still got my red Bosch so I’ll set both up and see if there is any difference, what’s the chances both out

 

[Old Mod]

I’ve still got my red Bosch so I’ll set both up and see if there is any difference, what’s the chances both out

 

[Old Mod]

Is your Bosch a 360 too Ian?

 

[Waluigi]

It tells you how to test the laser in the book that comes with the Dewalt.

 

[Blunt Tool]

Is your Bosch a 360 too Ian?

No

 

[Blunt Tool]

It tells you how to test the laser in the book that comes with the Dewalt.

Yeah bit complicated

 

[Waluigi]

Yeah it does appear complicated but it’s not too bad. Have a look on YT, I’m sure there’s lots on there. I’m pretty sure my Bosch laser had a simplified explanation. I’ll have a look later

 

[Bill]

If you need someone, there’s a guy Manchester way I’ve used and he’s excellent.
Quoted me £30 to recalibrate and it turned out it was a little more complicated.
Told me that it should of cost £80 but he’d quoted £30 and that’s all he wanted.
We argued and settled on £50.
Out and back to me inside 4 days.

Was this guy @3_fall ?.

Global Survey Equipment Ltd. - https://www.globalsurveyequipment.com/contact_us