Cutting porcelain tiles diagonally

[StuVin]

Thank you ATS, I only have three tile edges to do so I may look at using a hand pad. Are you able to provide a product name and part number?
Kind regards
Stuart

 

[Concrete guy]

Thank you ATS, I only have three tile edges to do so I may look at using a hand pad. Are you able to provide a product name and part number?
Kind regards
Stuart

I can't provide links back to our website on forum (advertising etc) but some of the other members will be able to point you in the right direction.

 

[Bill]

Thank you ATS, I only have three tile edges to do so I may look at using a hand pad. Are you able to provide a product name and part number?
Kind regards
Stuart

Just gooogle ATS Diamond tools .... and all you want is on there.

Top company and customer service.

 

[J Sid]

Thank you ATS, I only have three tile edges to do so I may look at using a hand pad. Are you able to provide a product name and part number?
Kind regards
Stuart

something like these will do you
ATS Diamond Tools | Diamond Hand Polishing Pads - https://www.atsdiamondtools.co.uk/product/diamond-hand-polishing-pads/

 

[StuVin]

Thank you guys, you’ve been very helpful. Is there one grade of hand pad that will do the trick to create the chamfer or will I require multiple grades?
Kind regards
Stuart

 

[Concrete guy]

If it's very dense stuff you may need two pads, otherwise one is enough.

#50 to cut it and #200 to finish it.

If it's not super dense a single #100 may be enough.