Dewalt D24000

[DavieA]

Hi all,

Well the D24000 saga continues. Have been having real issues with setting up the Dewalt 24000, at only a few weeks old and after being used on only 2 jobs have been troubled with the saw running off line. After hours of adjustments I have just about got the saw cutting true in a straight line. However when I tilt to cut 45 degree mitre on a straight edge of tile guess what...the mitre cut is now running off line :mad2:

Has anyone come across this issue with the D24000? Its driving me nuts.

Cheers

Dave

 

[Gazzer]

Nope mine has been fine from day one.

 

[DavieA]

These a post from a few years ago about one running off line but apart from that havent found much re my issue.

So yours cuts L cut leaving a perfect 90 degree? and mitres are spot on?

 

[Gazzer]

yep never had any issues .

 

[DavieA]

Good to know cheers

 

[Stef]

Never had a problem with mine & it cuts as good today as it did when I got it.
Had it years now.

 

[DavieA]

Never had a problem with mine & it cuts as good today as it did when I got it.
Had it years now.

Ah, Im wondering if its just not setup correctly.

Are you guys still using dewalt blade?

 

[Stef]

I am just now, bought a DNA off of Peter on here but not fitted it yet.
Used to run a marcrist in it but swapped back to the original blade.
I've never had one bit of bother with it, I've had it 6? Years now roughly.

 

[Gazzer]

Standard wheel, Rubi CPC wheel and soon to be fitted a Montolit wheel, as I said before. no issues !

 

[DavieA]

Strange, I have tried everything and it seems that just when I have it cutting on line as soon as I flip to mitre it runs off again leaving top of tile cut correctly but by the time the cuts finished the other end still has 2-3mm of material left.

Could it be me???....hope not.