Tilemaster Ditra And Anhyfix

[Italy]

View attachment 81988

good.bravo. Italian GDP increase. haha
rls (not raimondi) seem

 

[LM]

good.bravo. Italian GDP increase. haha
rls (not raimondi) seem

Yes Imp did you buy the ones of ferramenta web or somewhere like it ?

 

[One Day]

It's raimondi!

 

[Italy]

It's raimondi!

ouch ....
then there is a problem. if they are raimondi.
it could be. worn red wedges.
or impish. not yet learned how to push. red wedge. ahah lol

 

[J Sid]

ouch ....
then there is a problem. if they are raimondi.
it could be. worn red wedges.
or impish. not yet learned how to push. red wedge. ahah lol

nothing gets pass you

 

[One Day]

ouch ....
then there is a problem. if they are raimondi.
it could be. worn red wedges.
or impish. not yet learned how to push. red wedge. ahah lol

12mm tile. they are on the limit.

 

[Italy]

nothing gets pass you

as I understand it. julian
you're right. Problem to grow old.
and this....
antonio. not even notices it.
search spiked. up in a barn.
I hope exact wrote.
I apologize to impish

 

[Italy]

12mm tile. they are on the limit.

You are seen. but the problem. They are bent.
not well . vertically.

 

[Italy]

You are seen. but the problem. They are bent.
not well . vertically.

 

[One Day]

Thanks Antonio! This was my first time using them. I didn't think about that.
I struggled for a while (that area took me 6 hours) but by the end of the day I felt I had the hang of it.
I wasn't tightening them past 3 or 4 clicks on the pliers but I will watch out for the alignment on the clips.

 

[bcd-87]

Could that be 24th Feb '16? Batch number 5? All the tilemaster products I've used have a production date on them.

Oh rubbish... That's a good point !!

 

[Italy]

Thanks Antonio! This was my first time using them. I didn't think about that.
I struggled for a while (that area took me 6 hours) but by the end of the day I felt I had the hang of it.
I wasn't tightening them past 3 or 4 clicks on the pliers but I will watch out for the alignment on the clips.

Now I sleep peaceful. ahah
today,sold out antonio

 

[Andrew]

I can't understand why Schlutter won't recommend an adhesive for sticking down Ditra to a dry screed like they do with af200 on ply. I've fitted thousands of metres of stuck down carpets direct to screeds and believe me when I tell you they stick like sh*t, you try pulling up a needle punch carpet that's been stuck down, you have to cut it into 4-6 inch strips, use a clamp and pull with all you've got to get it up, so I can't get why you can't stick Ditra to a screed with an acrylic adhesive [/QUOT

I use af200 to fix ditra to dry screed all the time, in fact I won't use any thing else.
Conventional or Anhydrite, done tests and as you say after a day or 2 getting it up is impossible!

 

[Dumbo]

Still better than some adhesive manufacturers . When asking them about something once told me how it would all be OK, so ask them to send me written spec . Oh no can't do that as we haven't tested it . That's confidence for you and the tiler left to pick up the pieces