Forum recommendation

[GoneGuy]

Hello @Craig Powell welcome to the forum, I had a few bags of the new adhesive off Gareth Birks to try their other week.

 

[Flintstone]

Oh did you now, you sneaky snake you kept that quiet! 😀

 

[Craig Powell]

Hello @Craig Powell welcome to the forum, I had a few bags of the new adhesive off Gareth Birks to try their other week.

Hi mate, thanks for your welcome.

 

[Craig Powell]

Welcome to the forum @Craig Powell

Now shall we begin with who actually got you to use TileMaster in the first place???

Cheers Lee, you were indeed my main supplier of Tilemaster, with great service to boot.

 

[llevram]

Hello Craig,

Quick question, what’s your remcomended time to leave a finished floor before turning on thenunderfloor heating.
Polypipe water system in concrete screed that’s 5 years old, screed has been ditra matted, tiled with 600x600mm porcelain using setaflex s1 rapid grey, grouted with 3000 dark grey grout.

Thanks in advance

 

[Craig Powell]

Hello Craig,

Quick question, what’s your remcomended time to leave a finished floor before turning on thenunderfloor heating.
Polypipe water system in concrete screed that’s 5 years old, screed has been ditra matted, tiled with 600x600mm porcelain using setaflex s1 rapid grey, grouted with 3000 dark grey grout.

Thanks in advance

7 days mate, then turned on gradually, increasing temperature by no more than 2°C on the thermostat per day.